| No. | Brand | P | I | A | s | H | N | f | S |
| 68755A | Franke | - | - | 49 mm | - | 10 mm | - | - | - |
| 74134A | Franke | - | - | - | - | - | - | - | - |
| 73119L | Franke | - | - | - | - | - | - | - | - |
| 10-16 0500/0-0804 | IMO | - | - | - | - | - | - | - | - |
| 66393L | Franke | - | - | - | - | - | - | - | - |
| 11-25 0955/1-0312 | IMO | - | - | - | - | - | - | - | - |
| 11-20 0541/1-32122 | IMO | - | - | - | - | - | - | - | - |
| 77236A | Franke | - | - | - | - | - | - | - | - |
| 77256B | Franke | - | - | - | - | - | - | - | - |
| 12-25 1355/1-0326 | IMO | - | - | - | - | - | - | - | - |
| 66185L | Franke | - | - | - | - | - | - | - | - |
| 73053L | Franke | - | - | - | 17 mm | - | - | - | 17 mm |
| 11-16 0400/1-0813 | IMO | - | - | - | - | - | - | - | - |
| 92-20 0841/1-37252 | IMO | - | - | - | - | - | - | - | - |
| 68761A | Franke | - | - | - | - | - | - | - | - |
| 75068A | Franke | - | - | - | - | - | - | - | - |
| 77240A | Franke | - | - | - | - | - | - | - | - |
| 73064L | Franke | - | - | - | - | - | - | - | - |
| 66193L | Franke | - | - | - | - | - | - | - | - |
| 68763A | Franke | - | - | - | - | - | - | - | - |
| 66164L | Franke | - | - | - | - | - | - | - | - |
| 91-20 0641/1-37132 | IMO | - | - | - | - | - | - | - | - |
| 71045A | Franke | - | - | - | - | - | - | - | - |
| 77256B Franke Slewing Ring Bearings | r3 min.:1,1 mm; ra max.:2 mm; Da max.:148 mm; B:37 mm; Fatigue load limit (Pu):4,15; d2:91,1 mm; Outer Diameter (mm):160; Bearing number:7315BECBY; rb max.:1 mm; r2 min.:2,1 mm; r4 min.:1,1 mm; r1 min.:2,1 mm; C:37 mm; Reference speed:5000 r/min; D1:129 mm; Basic static load rating (C0):106 kN; Db max:153 mm; Size (mm):75x160x37; d1:108 mm; Bore Diameter (mm):75; |
| 77232B Franke Slewing Ring Bearings | Size (mm):30.16x64.29x21.43; D:64,29 mm; B:21,43 mm; Bearing number:HC STA3064LFT; Outer Diameter (mm):64,29; d:30,16 mm; Width (mm):21,43; T:21,43 mm; Bore Diameter (mm):30,16; |
| 11-20 0841/1-32152 IMO Slewing Ring Bearings | Bearing number:52414 M; Bore Diameter (mm):55; Width (mm):107; Basic dynamic load rating (C):229 kN; B:24 mm; d:55 mm; D1:73 mm; Outer Diameter (mm):150; D:150 mm; (Grease) Lubrication Speed:1530 r/min; Basic static load rating (C0):539 kN; Size (mm):55x150x107; Weight:9,7 Kg; H:107 mm; |
| 92-20 0741/1-37242 IMO Slewing Ring Bearings | (Grease) Lubrication Speed:1300 r/min; Size (mm):300x420x56; Configuration:Single Row; ra max.:2.5 mm; ra (max):2.5 mm; r min.:3 mm; Da (max):409 mm; Limiting Speed - Grease:1,400 rpm; Weight:22.8 Kg; Outside Diameter:420 mm; Dynamic Load Rating:269,000 N; Radial Clearance:0.040 to 0.115 mm; da min.:311 mm; Fillet Radius/Chamfer:3 mm; Static Load Rating:370,000 N; Enclosure:Open; Width:56 mm; Basic static load rating (C0):370 kN; |
| 12-25 0455/1-0421 IMO Slewing Ring Bearings | da min.:47 mm; Outer Diameter (mm):58; d:45 mm; Width (mm):7; Da max.:56 mm; Bearing number:6809NSE; Basic static load rating (C0):4,9 kN; ra max.:0.3 mm; Bore Diameter (mm):45; D:58 mm; Weight:0.040 Kg; r min.:0.3 mm; Basic dynamic load rating (C):5,35 kN; Size (mm):45x58x7; C:7 mm; B:7 mm; (Grease) Lubrication Speed:5900 r/min; |
| 12-25 1355/1-0326 IMO Slewing Ring Bearings | Basic static load rating (C0):0,177 kN; Bearing number:R1-5; Outer Diameter (mm):7,938; Basic dynamic load rating (C):0,549 kN; d:2,38 mm; Width (mm):2,779; C:2,779 mm; Size (mm):2.38x7.938x2.779; Weight:0,0006 Kg; D:7,938 mm; B:2,779 mm; Bore Diameter (mm):2,38; (Grease) Lubrication Speed:60000 r/min; |
| 74102A Franke Slewing Ring Bearings | (Oil) Lubrication Speed:360 r/min; Bearing number:23296CAE4; Width (mm):310; Outer Diameter (mm):870; Size (mm):480x870x310; Da min:733 mm; Da max.:834 mm; Basic static load rating (C0):14400 kN; Basic dynamic load rating (C):7850 kN; d:480 mm; r min.:7,5 mm; da min.:516 mm; Weight:795 Kg; Calculation factor (Y0):1,8; ra max.:6 mm; (Grease) Lubrication Speed:260 r/min; B:310 mm; Calculation factor (Y2):2,8; |
| 68719A Franke Slewing Ring Bearings | overall length:8.8750 in; radial static load capacity:43000 lb; maximum rpm:2590 RPM; base height:1.3125 in; d:2.0000 in; seal type:Triple Barrier Seal; expansion type:Non-Expansion Bearin; bearing type:Tapered Roller; locking device:Concentric Collar; lubrication type:Lubrication Fitting; operating temperature range:-30 to +180 &de; radial dynamic load capacity:10300 lb; B:3.5000 in; housing construction:Solid Pillow Block; |
| 68556A Franke Slewing Ring Bearings | Weight:0,44 Kg; Outer Diameter (mm):47; Weight / LBS:0.48502; Manufacturer Name:SCHAEFFLER GROUP; r min.:0,3 mm; Number of Bearings:2 (1 Pair); UNSPSC:31171531; Contact Angle:60 Degree; C:50 mm; Flush Ground:No; D:47 mm; Noun:Bearing; Angle (?):60 °; Basic dynamic load rating (C):30,5 kN; Outside Diameter:1.85 Inch | 47 Milli; Bearing number:ZKLN1747-2RS-2AP; Snap Ring:No; Da max.:37 mm; Inch - Metric:Metric; |
| 68659A Franke Slewing Ring Bearings | H2:158 mm; Weight:3 Kg; Basic dynamic load rating (C):34,1 kN; H:105 mm; L1:58 mm; Bearing number:UCPH209; Bore Diameter (mm):45; Width (mm):49,2; A:70 mm; S:19 mm; B:49,2 mm; J:146 mm; Basic static load rating (C0):21,3 kN; H1:20 mm; L:190 mm; N1:21 mm; d:45 mm; Bolt (G):M14; N:17 mm; |
| 90-20 0941/0-37062 IMO Slewing Ring Bearings | d:100 mm; Calculation factor (e):0,24; C:10 mm; Basic dynamic load rating (C):379 kN; B:46 mm; Weight:5,85 Kg; D:180 mm; B2:63 mm; Calculation factor (Y0):2,7; Basic static load rating (C0):510 kN; Calculation factor (Y1):2,9; Bearing number:22220-E-K-W33+AHX320; Size (mm):100x180x46; d1:95 mm; Outer Diameter (mm):180; Limiting speed:4500 r/min; Width (mm):46; Bore Diameter (mm):100; r1 min.:2,1 mm; |
| 68807A Franke Slewing Ring Bearings | typical application:Exceptional Bearing; construction description:Guardian® Flange; maximum shaft surface speed:12000 fpm; lip material:Labyrinth; width:0.7000 in; Weight:1.37 lbs; manufacturer catalog number:29602-3620; D:3.7510 in; pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; harmonization code:8487900040.US; shaft diameter:3.0000 in; misalignment tolerance:0.020 in; |
73087L Franke Slewing Ring Bearings Video
Pomona Electronics - 73087-72-0 - Jumper Test Lead Set, Black
73087-72-0 from Pomona Electronics at Allied Electronics & Automation.Connector Type Cable end 1: 4 mm Banana Pl...Type: Jumper/Test LeadsCable Length: 6 Ft
SEAL - A/C | 22-73087-000 | Excelerator Parts
22-73087-000. SEAL - A/C. Find My Dealer. Retrieving price... View PDC Availability Details. VMRS: 001-001-394 - O-RING - A/C SYSTEM. Alternative Products.
73087-36-0 - Pomona - Test Lead Set, Jumper, Sheathed ...
The 73087-36-0 is a Jumper Test Lead Set perfect for use with the 73084, 73085, 73086 and 73088 terminal jacks. The plug and housing are moulded directly to ...
Gorilla Automotive 73087 - Lug Nuts - Summit Racing
GOR-73087. UPC: 12619730872. Lug Nut Thread Size: 1/2 in.-20. Lug Nut Seat Style: Shank. Lug Nut Head Style: Standard. Locking: No. Open End Design:.
73087-12-2 Pomona Electronics | Test and Measurement
73087-12-2 ; Type. Patch Cord ; Material - Insulation. Silicone ; Wire Gauge. 18 AWG ; Voltage - Rated. 1000VAC (1kV) ; Ratings. CAT I 1000V.
73087-150-4 - Pomona - Mouser Electronics
Specifications ; Equipment Type: Jumper Test ; Connector Type: Banana Plug to Banana Plug Test Lead ; Cable Type: 18 AWG Wire ; Length: 4 in.
Model 73087 - Pomona Electronics
Model 73087, Jumper Test Lead Set. Features. • Each jumper test lead set includes one sheathed 4mm banana plug to sheathed 4mm banana plug test lead, ...2 pages