No. | Brand | P | I | A | s | H | N | f | S |
92-20 1091/1-37272 | IMO | - | - | - | - | - | - | - | - |
11-25 1155/1-0314 | IMO | - | - | - | - | - | - | - | - |
77240A | Franke | - | - | - | - | - | - | - | - |
68953A | Franke | - | - | - | - | - | - | - | - |
11-16 0100/1-081 | IMO | - | - | - | - | - | - | - | - |
11-16 0300/1-0812 | IMO | - | - | - | - | - | - | - | - |
12-20 0311/1-32202 | IMO | - | - | - | - | - | - | - | - |
77274B | Franke | - | - | - | - | - | - | 2,82 mm | - |
73106L | Franke | - | - | - | - | - | - | - | - |
73004L | Franke | - | - | - | - | - | - | - | - |
91-20 0541/1-37122 | IMO | - | - | - | - | - | - | - | - |
68679A | Franke | - | - | - | - | - | - | - | - |
68655A | Franke | - | - | - | - | - | - | - | - |
75079A | Franke | - | - | - | - | - | - | - | - |
68667A | Franke | - | - | - | - | - | - | - | - |
75068A | Franke | - | - | - | - | - | - | - | - |
73058L | Franke | - | - | - | - | - | - | - | - |
77284A | Franke | - | - | - | - | - | - | - | - |
75014A | Franke | - | - | - | - | - | - | - | - |
75054A | Franke | - | - | - | - | - | - | - | - |
73005L Franke Slewing Ring Bearings | series:YAS; base width:1-13/32 in; locking device:Set Screw; seal type:Contact/Lip; D:4-1/8 in; replacement bearing:GY1015KRRB; base to bore centerline:1.4375 in; bore type:Round; d:0.9375 in; housing material:Cast Iron; B:1-11/32 in; radial dynamic load capacity:3550 lb; overall length:5.5000 in; radial static load capacity:1730 lb; operating temperature range:Maximum of +250; |
66166L Franke Slewing Ring Bearings | Size (mm):360x540x134; Bore Diameter (mm):360,000; H:134,000 mm; D:540,000 mm; Bearing number:23072VMW33; Outer Diameter (mm):540,000; Width (mm):134,000; d:360,000 mm; |
74082A Franke Slewing Ring Bearings | row type & fill slot:Single Row Non-Fill; D:95 mm; cage material:Steel; finish/coating:Uncoated; precision rating:ABEC 3 (ISO Cla; series:6000; bore type:Round; closure type:Open; d:60 mm; bearing material:Steel; B:18 mm; snap ring included:Without Snap Ring; inner ring width:18 mm; outer ring width:18 mm; |
10-20 0741/0-32042 IMO Slewing Ring Bearings | Basic static load rating (C0):46,5 kN; d:35 mm; Outer Diameter (mm):72; C:17 mm; B:17 mm; D:72 mm; Bearing number:N207E; Weight:0,311 Kg; (Grease) Lubrication Speed:7500 r/min; Basic dynamic load rating (C):48 kN; Width (mm):17; Size (mm):35x72x17; Bore Diameter (mm):35; |
68613A Franke Slewing Ring Bearings | manufacturer catalog:www.aurorabearing.co; shank thread length:1.2500 in; length to ball center:1.8750 in; shank thread size:5/16-24; harmonization code:8483.30.8055; thread direction:Left Hand; thread type:UNF-3A-LH; d:0.2500 in; head diameter:0.8750 in; Weight:0.072 lb; housing material:Alloy Steel; ball material:Alloy Steel; series:XAB; overall height:2.3125 in; misalignment angle:13 º; |
77293B Franke Slewing Ring Bearings | material:Hardened Alloy Steel; series:BHI; overall nut width:0.5630 in; D:2.6250 in; thread direction:Right Hand; thread size:1.750-16; manufacturer product page:Click here; face diameter:2.3130 in; axial load:25500 lbs; |
10-25 1255/0-0305 IMO Slewing Ring Bearings | operating temperature range:Maximum of +120; maximum misalignment:4 °; internal clearance:C0; maximum rpm:7500 RPM; dynamic load capacity:16000 N; series:112; bore type:Straight; D:72 mm; closure type:Open; precision rating:Not Rated; d:35 mm; cage material:Polyamide; finish/coating:Uncoated; inner ring width:52 mm; static load capacity:5100 N; outer ring width:17 mm; B:52 mm; standards met:DIN 630; |
11-20 0641/1-32132 IMO Slewing Ring Bearings | Design (sliding contact surface combination):Steel/PTFE fabric; r2 min.:1 mm; Outer Diameter (mm):76,2; Da - min.:109.2 mm; Da min.:109.2 mm; Da - max.:113.5 mm; Bearing number:GEZ 300 TXE-2LS; Specific factor dinamic load - K:150 N/mm2; Specific dynamic load factor K:150 N/mm²; da min.:81.8 mm; da - min.:81.8 mm; α:6 °; r1 - min.:0.6 mm; Width (mm):66,675; C:57.15 mm; Basic dynamic load rating - C:750 kN; |
68681A Franke Slewing Ring Bearings | Da max.:479 mm; Basic static load rating (C0):8500 kN; Fatigue load limit (Pu):570; D:560 mm; D1:464 mm; Basic dynamic load rating (C):1460 kN; Size (mm):460x560x80; Weight:41 Kg; d:460 mm; Limiting speed:600 r/min; Bore Diameter (mm):460; Outer Diameter (mm):560; da min.:553 mm; r1 min.:2,1 mm; d1:555 mm; ra max.:2 mm; Width (mm):80; Dw:32 mm; B:24 mm; r2 min.:2,1 mm; |
68757A Franke Slewing Ring Bearings | maximum rpm:880 rpm; thread size:1-1/4-12; closure type:Sealed; radial static load capacity:18000 lbs; bearing element:Needle Rollers; roller width:1.7500 in; radial dynamic load capacity:15720 lbs; series:Inch CAMROL (CF; head type:Hex; roller material:Chrome Steel; stud diameter:1.2500 in; roller shape:Flat; roller diameter:3.2500 in; manufacturer catalog number:2320212000; finish/coating:Black Oxide; |
68661A Franke Slewing Ring Bearings | bearing material:Duralon Filament; D:8.2500 in; B:2.0000 in; d:8.0000 in; |
68743A Franke Slewing Ring Bearings | Inner Race Width:0 Inch | 0 Millimete; Weight:0.990 Kg; Bore Diameter (mm):65; d:65 mm; Basic static load rating (C0):40 kN; da (min):74 mm; Category:Single Row Ball Bear; ra (max):1.5 mm; Long Description:65MM Bore; 120MM Out; Keyword String:Ball; r min.:1.5 mm; ra max.:1.5 mm; Outside Diameter:4.724 Inch | 120 Mil; Factor fo:14.4; Inventory:0.0; Configuration:Single Row; Cage Material:Steel; Precision Class:ABEC 1 | ISO P0; |
66393L Franke Slewing Ring Bearings Video
Ridgid 66393 PipeSaw Kit with Cutting Head & 6” – 12” Clamp
SKU: Ridgid 66393. UPC: 95691663931.00. Weight: 68.2 lbs. Ridgid 66393 PipeSaw Kit with Cutting Head & 6” – 12” Clamp. List: $4,123.10 $4,003.00 + Free ...
66393L Slewing Ring Bearings
66393L Slewing Ring Bearings ; Outside Diameter Of Outer Ring, 26 mm ; Weight, 58.9 Kg ; Basic Dynamic Load Rating Axial (Ca), 143000 N ; Basic Static Load Rating ...
RIDGID PC-612 + PCS-500 (66393) Pipe Saw Kit with Cutting ...
Product Features: Interchangeable cutting head cuts up to 12 in. pipe with a 1/2 in. wall thickness; Compatible with two clamp sizes: 1" to 6" (sold ...
RIDGID PipeSaw PCS-500 Kit - PC-612 6" - 12" Clamp 66393
PipeSaw Kit w/ Cutting Head & 6 - 12" Clamp 66393. Cut pipe fast and efficiently with the RIDGID PipeSaw. From the fab shop to the field; this tool delivers ...
66393-1 : AMP Power Contacts | TE Connectivity
66393-1 · AMP Type III+, Power Contacts, Contact, Precious Metal, 30 – 26 AWG Wire Size, .05 – .15 mm² Wire Size, Wire & Cable, Crimp, Power & Signal, Pin.
66393-3 TE Connectivity AMP Connectors - Digikey
Order today, ships today. 66393-3 – Pin Contact Gold Crimp 26-30 AWG Stamped from TE Connectivity AMP Connectors. Pricing and Availability on millions of ...
RIDGID Pipesaw Kit with Cutting Head & 6-12 in. Clamp R66393
Pipesaw Kit with Cutting Head & 6-12 in. Clamp. Part #R66393 | Item #9507559 | Manufacturer Part #66393. RIDGID Pipesaw Kit with Cutting Head & 6-12 in.