| No. | Brand | C | J | E | d | B | h | K | N |
| 68713A | Franke | - | - | - | 4.2500 in | 0.3750 in | - | - | - |
| 77300A | Franke | - | - | - | 0.5000 in | 4.4375 in | - | - | - |
| 77230B | Franke | - | - | - | - | 2.5000 in | - | - | - |
| 68954A | Franke | - | - | - | - | - | 40.481 mm | - | - |
| 74078A | Franke | - | - | - | - | - | 31.75 mm | - | - |
| 73125L | Franke | - | - | - | 0.1900 in | - | - | - | - |
| 68491A | Franke | - | - | - | - | - | - | - | - |
| 68753A | Franke | - | - | - | 1.9375 in | 3.5000 in | - | - | - |
| 68625A | Franke | - | - | - | 1 in | 1-1/16 in | - | - | - |
| 66177L | Franke | - | - | - | 1.1875 in | 1.1560 in | - | - | - |
| 77276A | Franke | - | - | - | - | - | - | - | - |
| 68478A | Franke | - | - | - | 0.5000 in | 2-15/32 in | - | - | - |
| 75069A | Franke | - | - | - | 1.2500 in | - | - | - | - |
| 75057A | Franke | - | - | - | 32 mm | 20 mm | - | - | - |
| 77214A | Franke | - | - | - | 190 mm | 28.829 mm | - | - | - |
| 66153L | Franke | - | - | - | 140 mm | 50 mm | - | - | - |
| 68520A | Franke | - | - | - | - | - | - | - | - |
| 77206A | Franke | - | - | - | 1.6250 in | - | - | - | - |
| 71053A | Franke | - | - | - | 35 mm | 25 mm | - | - | - |
| 68566A | Franke | - | - | - | 1.0000 in | - | - | - | - |
| 68773A | Franke | - | - | - | - | - | - | - | - |
| 68805A | Franke | - | - | - | - | - | - | - | - |
| 74078A Franke Slewing Ring Bearings | PG:1/8 NPT; ba:30.163 mm; Housing:SAF 215; Pa:19.6 kN; P180°:30.2 kN; L:285.75 mm; End plug (suffix Y):EPR 8; Taconite seal (dc shaft position):TER 46; RG:1/4 NPT; H2:28.575 mm; Ca:37.008 mm; P60°:75.6 kN; dc:71.438 mm; Taconite seal (db shaft position):TER 79; h:31.75 mm; A1:79.375 mm; H1:82.55 mm; da:75 mm; P120°:28 kN; db:87.313 mm; |
| 74092A Franke Slewing Ring Bearings | lubrication type:Lubrication Fitting; replacement bearing:UC210-30C4HR5; mounting type:Two-Bolt Flange; seal type:Contact with Flinger; radial dynamic load capacity:2150 lbf; duty type:Standard Duty; series:UCFT200C4HR5; radial static load capacity:1080 lbf; bore type:Round; locking device:Set Screw; length through bore:0.866 in; B:7.4375 in; d:1.8750 in; housing material:Cast Iron; D:6.1875 in; |
| 68497A Franke Slewing Ring Bearings | Calculation factor e:0.2; Limiting speed:320 r/min; r1,2 min.:4 mm; D:870 mm; Mass bearing:92.5 kg; Fatigue load limit Pu:285 kN; Da max.:855 mm; da min.:725 mm; d:710 mm; Basic static load rating C0:3750 kN; das:759 mm; Calculation factor kr:0.1; d1 ≈:767 mm; Reference speed:260 r/min; ra max.:3 mm; E:831 mm; s max.:8 mm; Basic dynamic load rating C:1540 kN; B:74 mm; D1 ≈:815 mm; |
| 68609A Franke Slewing Ring Bearings | series:100; outer ring width:12 mm; B:12 mm; d:20 mm; closure type:Double Sealed; fillet radius:0.64 mm; dynamic load capacity:2076 lb; bearing material:Steel; standards met:SAE 52100; static load capacity:1456 lbs; finish/coating:Uncoated; internal clearance:C0; operating temperature range:-80 to +350 &de; cage material:Aluminum, Phenolic R; D:42 mm; bore type:Round; maximum rpm:42500 RPM; precision rating:ABEC 7 (ISO Cla; |
| 66150L Franke Slewing Ring Bearings | B:5.3750 in; duty type:Standard Duty; expansion type:Non-Expansion Bearin; replacement bearing:SUC206-20; finish/coating:Thermoplastic; overall height:1.6220 in; manufacturer upc number:8865590387908; manufacturer catalog:Click here; bolt size:0.3125 in; locking device:Set Screw; lubrication type:Lubrication Fitting; housing material:Thermoplastic; D:1.8750 in; d:1.2500 in; bore type:Round; mounting type:Three-Bolt Bracket S; |
| 77238A Franke Slewing Ring Bearings | operating temperature range:Maximum of +250; D:1/2 in; material specification:BOST-BRONZ; flange width:3/64 in; maximum v value:1200 fp/min; overall length:3/8 in; maximum p value:2000 psi; d:1/4 in; bearing material:Oil-Impregnated Sint; groove/plug type:None; sleeve bearing type:Flanged Bearing; standards met:MIL-B-5687C Type I C; maximum pv value:50000; |
| 71061A Franke Slewing Ring Bearings | maximum v value:750 fp/min; overall length:3 in; bearing material:Cast Bronze C93200 &; sleeve bearing type:Plain Sleeve; material specification:SAE 660 (C932&#; operating temperature range:Max 500 ºF; manufacturer catalog:Click here; d:15/16 in; standards met:83-7-7-3, ASTM B505,; manufacturer upc number:717905061936; Weight:0.626 lb; maximum p value:4000 psi; groove/plug type:None; |
| 67511A Franke Slewing Ring Bearings | d:2.1875 in; expansion type:Expansion Bearing &#; lubrication type:Lubrication Fitting; maximum rpm:1250 RPM; housing material:Cast Iron; locking device:Concentric Collar; operating temperature range:+200 to +4; series:EMP; finish/coating:Uncoated; seal type:Felt Seal; bore type:Round; base to bore centerline:2.7500 in; mounting:Two-Bolt Base; D:6-9/16 to 7-15&; base width:3-1/8 in; |
| 66394L Franke Slewing Ring Bearings | harmonization code:8483.30.8055; misalignment angle:17 º; thread type:UNF-2B-LH; thread direction:Left Hand; housing material:Low Carbon Steel; ball material:Alloy Steel; head diameter:2.7500 in; lubrication type:Zerk Fitting; rod end type:Female Threaded; Weight:2.41 lbs; head width:1.000 in; overall height:5.5000 in; grade:Precision; ball width:1.3750 in; manufacturer catalog:www.aurorabearing.co; |
| 74138A Franke Slewing Ring Bearings | cone width:2.0625 in; D:12.8750 in; flange type:Flanged Cup; cage material:Steel; compatible cone:8573; bearing material:Chrome Steel; finish/coating:Uncoated; dynamic load capacity:219000 lbf, 126000 l; series:8500; closure type:Open; d:9.0000 in; operating temperature range:-65 to +250 &de; assembly type:Cone & Cup; static load capacity:240000 lbf; cup width:3.2500 in; |
| 66160L Franke Slewing Ring Bearings | bore type:Round; bolt size:1/2; manufacturer product page:Click here; radial static load capacity:2450 lbf; mounting:Two-Bolt Base; d:1.0000 in; lubrication type:Lubrication Fitting; duty type:Heavy Duty; seal type:Contact with Slinger; radial dynamic load capacity:4780 lbf; overall height:3.2500 in; housing material:Cast Iron; base to bore centerline:1.7656 in; base width:1-3/4 in; replacement bearing:UC305-16; |
| 75036A Franke Slewing Ring Bearings | frame type:Two-Piece Saddle Mou; rod diameter:3/4 in; travel:9 in; overall length:22 in; D:20-1/22 in; base width:3-3/4 in; manufacturer catalog number:038945; series:LD; overall height:2-19/32 in; bolt center-to-center width:2-1/2 in; |
77250B Franke Slewing Ring Bearings Video
77250B LILY Interchangeable From Franke Slewing Ring Bearings ...
Lily 77250B Slewing Ring Bearings, Franke Part No. 77250B, LILY Part No. L77250B, Series LED Series, Gear Without gear, Type Ball, System of Measurement ...
#77250b Color Hex
77250b color hex, #77250b color chart,rgb,hsl,hsv color number values, html css color codes and html code samples.
#77250b Hex Color Code, RGB and Paints - Encycolorpedia
The hexadecimal color code #77250b is a medium dark shade of red-orange. In the RGB color model #77250b is comprised of 46.67% red, 14.51% green and 4.31% blue.
77250B Hand Operated Monochromator
This simple, manually operated instrument has good resolution, low stray light and is very versatile. A large family of slits and gratings are available to meet ...
77250B-MC - Newport Corporation | Monochromator
The 77250B-MC from Newport Corporation is a Hand Operated Monochromator that operates from 0.2 to 23 μm using Newport's interchangeable diffraction gratings ...
Oriel 77250 Series 1/8 m Monochromator - PDF Catalogs
Consult MICRO-CONTROLE / Spectra-Physics's Oriel 77250 Series 1/8 m Monochromator brochure on DirectIndustry. Page: 1/3.
New 77250B 1/8 m Hand Operated Monochromator - Newport
For general-purpose laboratory work or academic applications, the Oriel 77250B Series 1/8 m Hand Operated Monochromator is a smart and economical choice.