| No. | Brand | a | d | D | B | Dx | da | Da | TP |
| 12.30.1800.001.41.1503 | Standard 5 | - | 75 mm | 130 mm | 25 mm | - | - | - | - |
| 92.25.1502.991.21.1503 | Standard 5 | - | 160 mm | - | 68 mm | - | - | - | - |
| 12.45.3400.100.19.1502 | Standard 5 | - | 45.000 mm | 68.0000 mm | 12.00 mm | - | - | - | - |
| 162.45.2510.891.41.1503 | Standard 5 | - | 40 mm | 90 mm | 33 mm | - | - | - | - |
| 12.50.2559.201.49.1502 | Standard 5 | - | 420.000 mm | 560.0000 mm | 65.00 mm | - | - | - | - |
| 61.40.1800.014.29.1503 | Standard 5 | - | - | 700 mm | 165 mm | - | - | - | - |
| 61.25.1455.575.11.1403 | Standard 5 | - | 150 mm | - | 80 mm | - | - | - | - |
| 162.40.2128.890.11.1503 | Standard 5 | - | 85.000 mm | 130.0000 mm | 22.00 mm | - | - | - | - |
| 60.25.1355.575.11.1403 | Standard 5 | - | 75 mm | 130 mm | 25 mm | - | - | - | - |
| 192.50.3550.990.41.1502 | Standard 5 | - | 110.000 mm | 150.0000 mm | 40.00 mm | - | - | - | - |
| 11.40.2240.001.41.1502 | Standard 5 | - | 70 mm | 125 mm | 39.7 mm | 136.5 mm | 79 mm | 116 mm | - |
| 91.30.1415.991.21.1502 | Standard 5 | - | 55 mm | 120 mm | - | - | - | - | - |
| 191.25.2000.990.41.1502 | Standard 5 | - | 30.000 mm | 62.0000 mm | - | - | - | - | - |
| 162.50.3000.891.41.1503 | Standard 5 | - | 180.000 mm | 225.0000 mm | 22.00 mm | - | - | - | - |
| 92.40.2003.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.40.2003.991.41.1502 | Standard 5 | - | - | 125 mm | 22 mm | - | - | - | - |
| 61.40.1800.013.19.1503 | Standard 5 | - | 105.000 mm | 145.0000 mm | 20.00 mm | - | - | - | - |
| 61.40.1600.008.19.1503 | Standard 5 | - | - | 140 mm | 33 mm | - | - | - | - |
| 61.25.1355.500.11.1503 | Standard 5 | - | 110.000 mm | 240.0000 mm | 92.10 mm | - | - | - | - |
| 11.40.2619.001.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.50.3839.001.49.1502 | Standard 5 | - | 30.000 mm | 72.0000 mm | 33.30 mm | - | - | - | - |
| 11.40.2915.001.41.1502 | Standard 5 | - | 105 mm | 225 mm | 49 mm | - | - | - | - |
| 11.40.2915.000.11.1502 | Standard 5 | - | 30 mm | 90 mm | 23 mm | - | - | - | - |
| 91.40.2003.991.41.1502 | Standard 5 | - | 55.000 mm | 120.0000 mm | 52.40 mm | - | - | - | - |
| 11.35.1750.700.11.1503 Standard 5 Slewing Ring Bearings | Bore Type:Cylindrical Bore; ra (max):1.5 mm; D:130 mm; Inside Ring Outside Diameter:88.5 mm; db (max):87 mm; Static Load Rating:111,000 N; Limiting Speed - Grease:4,800 rpm; db (min):83.5 mm; Enclosure:Open; ra1 (max):1.5 mm; dc (min):90 mm; Fillet Radius/Chamfer:1.5 mm; Da (max):121.5 mm; Dynamic Load Rating:96,500 N; Limiting Speed - Oil:6,000 rpm; r1:1.5 mm; d:75 mm; dd (min):96 mm; B:25 mm; Configuration:Single Row; |
| 162.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:165000 N; Grease Speed Rating n1:5000 rpm; d:60.000 mm; Oil Speed Rating n2:7200 rpm; D:130.0000 mm; Basic Static Radial Load Rating Co:143000 N; B:62.00 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; |
| 162.28.1500.891.21.1503 Standard 5 Slewing Ring Bearings | ra (max):0.6 mm; Da (max):51 mm; Dynamic Load Rating:10,400 N; Snap Ring Outside Diameter:57.8 mm; D:55 mm; D1 (max):53.7 mm; Limiting Speed - Oil:15,000 rpm; Factor fo:15.6; Limiting Speed - Grease:12,000 rpm; Enclosure:Snap Ring Groove wit; Configuration:Single Row; Fillet Radius/Chamfer:0.6 mm; Dx (min):58.5 mm; Cy (max):2.3 mm; a (max):1.7 mm; b (min):1 mm; r1:0.5 mm; Radial Clearance:0.015 to 0.033 mm; |
| 61.25.1455.575.11.1403 Standard 5 Slewing Ring Bearings | d:150 mm; ra (max):2 mm; Da (max):238 mm; da (min):162 mm; Bore Type:Cylindrical Bore; Retainer Material:Pressed Steel; Enclosure:Open; B:80 mm; Hole Diameter (do):6 mm; Constant e:0.30; Nr. of Holes:6; Radial Clearance:0.110 to 0.170 mm; Axial Load Factor Y1:2.24; Limiting Speed - Grease:2,100 rpm; Fillet Radius/Chamfer:2.1 mm; Axial Load Factor Y0:2.19; Axial Load Factor Y2:3.34; Dynamic Load Rating:1,000,000 N; |
| 161.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:75000 N; Fillet Radius rb:1.00 mm; d:55.000 mm; Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:79300 N; B:42.00 mm; D:100.0000 mm; Oil Speed Rating n2:6000 rpm; |
| 162.50.3000.891.41.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:62400 N; d:180.000 mm; Sealed Speed Rating n3:0 rpm; D:225.0000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:3000 rpm; Basic Static Radial Load Rating Co:76500 N; Fillet Radius ra:1.00 mm; B:22.00 mm; |
| 91.30.1415.990.11.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:12900 N; Grease Speed Rating Open/Shielded n1:6300 rpm; B:10.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Accessories:Without Accessories; Fillet Radius ra:0.60 mm; d:75.000 mm; Sealed Speed Rating n3:4000 rpm; Basic Dynamic Radial Load Rating C:12500 N; D:95.0000 mm; |
| 91.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | d:55.000 mm; Basic Dynamic Radial Load Rating C:106000 N; B:52.40 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; Sealed Speed Rating n3:3800 rpm; Grease Speed Rating n1:3800 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:81500 N; |
| 162.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | a (max):5.7 mm; B:34 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:122,000 N; d:100 mm; Dx (min):195 mm; b (min):3.5 mm; Limiting Speed - Grease:3,600 rpm; Cy (max):8.4 mm; Fillet Radius/Chamfer:2.1 mm; Static Load Rating:93,000 N; D:180 mm; Snap Ring Outside Diameter:192.9 mm; ra (max):2 mm; Da (max):168 mm; Weight:3.140 kg; r1:0.5 mm; Limiting Speed - Oil:4,300 rpm; Enclosure:Snap Ring Groove wit; |
| 192.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Limiting Speed - Oil:1,700 rpm; dc (min):248 mm; Limiting Speed - Grease:1,400 rpm; Da (max):378 mm; Radial Clearance:0.090 to 0.145 mm; ra1 (max):4 mm; db (max):240 mm; Static Load Rating:1,260,000 N; db (min):212 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; d:190 mm; Dynamic Load Rating:975,000 N; B:78 mm; D:400 mm; Fillet Radius/Chamfer:5 mm; dd (min):268 mm; Enclosure:Open; Inside Ring Outside Diameter:245 mm; |
| 12.30.2538.001.41.1503 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:5 mm; Radial Clearance:0.225 to 0.305 mm; Enclosure:Open; ra (max):4 mm; dc (min):390 mm; db (max):381 mm; ra1 (max):4 mm; Limiting Speed - Oil:1,300 rpm; d:340 mm; Configuration:Single Row; Limiting Speed - Grease:1,200 rpm; Dynamic Load Rating:1,080,000 N; B:82 mm; D:520 mm; Weight:65.900 kg; Static Load Rating:1,740,000 N; r1:5 mm; Bore Type:Cylindrical Bore; db (min):362 mm; |
| 92.40.2003.991.41.1502 Standard 5 Slewing Ring Bearings | Snap Ring Width:2.8 mm; Weight:0.825 kg; Enclosure:Single Shield with S; r1:0.5 mm; Fillet Radius/Chamfer:1.1 mm; a (max):2.9 mm; Factor fo:15.6; Snap Ring Outside Diameter:134.7 mm; Cy (max):5.3 mm; b (min):3.1 mm; Bore Type:Cylindrical Bore; D:125 mm; Configuration:Single Row; Da (max):119 mm; Limiting Speed - Grease:5,300 rpm; Dx (min):136.5 mm; ra (max):1 mm; B:22 mm; D1 (max):120.2 mm; Static Load Rating:39,500 N; |
61.40.1800.013.19.1503 Standard 5 Slewing Ring Bearings Video
48 CFR § 19.1503 - Status.
(a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.
19.1503 Status. |
19.1503 Status. (a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.
Federal Acquisition Regulation 19.1503
Women-Owned Small Business (WOSB). Program. (b) The purpose of the WOSB Pro- gram is to ensure women-owned small business concerns have an equal oppor-.2 pagesMissing: 61.40.1800.013.19.1503 | Must include: 61.40.1800.013.19.1503