| No. | Brand | U | E | A | k | S | e | C | b |
| NJ318-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ409W | NSK | - | - | - | - | - | - | - | - |
| NJ214-E-M1-F1-T51F-C3 | FAG | - | - | - | - | - | - | - | - |
| NU411-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ209-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ207-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NN3014TBKRE44CC1P4 | NSK | - | - | - | - | - | - | - | - |
| NU410-M1 | FAG | - | - | - | - | - | - | - | - |
| N321-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ318WC3 | NSK | - | - | - | - | - | - | - | - |
| NUP2310W | NSK | - | - | - | - | 0.697 in | - | - | - |
| NU412-M1-F1-T51F | FAG | - | - | 90.00 mm | - | - | - | - | - |
| NJ207-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| NU407-C3 | FAG | - | - | - | - | - | - | - | - |
| NU418-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ318-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| NU409-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ212-E-TVP2-C4 | FAG | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| NJ319-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| FAG NU412-M1-F1-T51F Cylindrical Roller Bearings | N1:20.00 mm; A:90.00 mm; H2:25.0 mm; C0 Static Load Rating:118; N:15 mm; Jmax:175 mm; J:170.00 mm; Jmin:165 mm; Bearing:22210; Max Grease Speed:5000; |
| 50 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter NSK NUP2210ET Cylindrical Roller Bearings | Mass bushing:0.54 kg; Specific dynamic load factor K:140 N/mm²; D:110 mm; Tolerance housing:H7; Specific static load factor K0:200 N/mm²; B:120 mm; Tolerance shaft:h8; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:11210 mm²; Size (mm):50 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter ; |
| FAG NU322-E-M1A-C3 Cylindrical Roller Bearings | Grease Lubrication - M/N Seal:900 rpm; Full Timken Part Number:99999B; Dimension RV:0.47 in; Dimension BC:10.75 in; Shaft Tolerance:0.0030 in; Pre Install Clearance Min:0.0043 in; Dimension E:7.60 in; Dimension H:1.50 in; Bearing Number:22222; Dimension SV:4.13 in; |
| 100 x 7.087 Inch | 180 Millimeter x 1.339 Inch | 34 Millimeter NSK NUP220ET Cylindrical Roller Bearings | Series:18700; Y - ISO Factor3:1.48; C - Cup Width:0.5313 in; D:3.5000 in; e - ISO Factor2:0.41; Cup Part Number:18724; Db - Cup Backface Backing Diameter:3.07 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.27 in; r - Cup Backface To Clear Radius1:0.050 in; Size (mm):100 x 7.087 Inch | 180 Millimeter x 1.339 Inch | 34 Millimeter ; |
| FAG NU412-M1-C4 Cylindrical Roller Bearings | K - Factor8:1.76; C0 - Static Radial Rating:129000 lbf; R - Cone Backface To Clear Radius3:0.2 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:11100 lbf; a - Effective Center Location4:-0.1 in; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:131000 lbf; Cone Part Number:M229349A; Aa - Cage-Cone Backface Clearance:0.04 in; Ab - Cage-Cone Frontface Clearance:0.13 in; |
| 90 mm x 190 mm x 43 mm FAG NJ318-E-TVP2 Cylindrical Roller Bearings | Cg - Geometry Factor:0.0893; C0 - Static Radial Rating:13100 lbf; G2 - Heat Generation Factor (Rib-Roller End):55; Aa - Cage-Cone Backface Clearance:0.8 mm; D:98.425 mm; Series:LL713000; Bearing Weight:0.30 Kg; B:13.495 mm; Db - Cup Backface Backing Diameter:91.95 mm; da - Cone Frontface Backing Diameter:73.91 mm; Size (mm):90 mm x 190 mm x 43 mm ; |
| FAG NJ318-E-TVP2-C3 Cylindrical Roller Bearings | Bearing Number:MSE715BX; Dimension L:10.1 in; Support Type:Round Flange; Dimension P:1.3 in; Seal Type:Felt Seal; Bearing UPC:013992033154; Cor - Static Load Rating:340810 lbf; Bearing Type:Split Cylindrical Ex; Series Type:Medium Series; Bolt Size:4 x M30; |
| 3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter NSK NJ317WC3 Cylindrical Roller Bearings | D:560 mm; K:9 mm; α:20 °; B:420 mm; D1 ≈:514.3 mm; d:410 mm; F:450 mm; Design variant/feature:BC4.18/W33GWI; b:16.7 mm; r3,4 min.:2 mm; Size (mm):3.346 Inch | 85 Millimeter x 7.087 Inch | 180 Millimeter x 1.614 Inch | 41 Millimeter ; |
| FAG NJ208-E-M1A-C3 Cylindrical Roller Bearings | Cg - Geometry Factor12:0.147; Cone Part Number:EE134102D; Ab - Cage-Cone Frontface Clearance:0.12 in; B - Double Cone Width:4.2500 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:39600 lbf; R - Cone Frontface To Clear Radius1:0.130 in; Design Units:Imperial; Y1 - ISO Factor9:1.8; d:10.2500 in; C - Cup Width:1.6875 in; |
| 15 mm x 35 mm x 11 mm FAG NJ202-E-TVP2 Cylindrical Roller Bearings | Series Type:Medium Series; Bolt Size:4 x M30; Dimension V:0.2 in; Note:This product line wa; Support Type:Round Flange; Dimension T:23.5 in; Cr - Dynamic Load Rating:208398 lbf; Shaft Size:175 mm; Cor - Static Load Rating:305066 lbf; Dimension H:5.1 in; Size (mm):15 mm x 35 mm x 11 mm ; |
| FAG NU324-E-M1-F1-C4 Cylindrical Roller Bearings | Dimension series:HH 221400; da max.:119 mm; Da min.:163 mm; r3,4 min.:3.3 mm; T:57.15 mm; Calculation factor Y:1.8; Ca min.:9 mm; db min.:125.5 mm; C:46.038 mm; Fatigue load limit Pu:68 kN; |
| FAG N324-E-M1-C3 Cylindrical Roller Bearings | db max.:93.3 mm; Preload class C GC:960 N; Static axial stiffness, preload class B:139 N/µm; Number of balls z:20; r1,2 min.:1.1 mm; Preload class A GA:240 N; D:125 mm; Preload class B GB:480 N; Mass bearing:0.72 kg; Preload class D GD:1920 N; |
| 120 mm x 260 mm x 55 mm FAG N324-E-M1 Cylindrical Roller Bearings | Static Load Rating Co:19520 kN; Backing Shaft Diameter ds:705.9 mm; Inner-Ring Set:650ARXS2841; Outer-Ring Set:723RXS2841; Lubrication Hole Diameter h:13.0 mm; Angle of Chamfer r1smin:20º; Backing Housing Diameter Ds:859.0 mm; DUR/DOR F/E:723.000 mm; Bore d:650.000 mm; Width B:670.000 mm; Size (mm):120 mm x 260 mm x 55 mm ; |
| 60 x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter NSK NJ312W Cylindrical Roller Bearings | Bore Size d:55 mm; Outside Diameter D:140.000 mm; C0r - Static Load Rating:62.4 kN; Oil Reference Speed:9100 rpm; Cr - Dynamic Load Rating:100.7 kN; Outside Ring Width B:33.000 mm; Grease Reference Speed:6300 rpm; Clearance:C0 (Normal); Weight:2.30 Kg; Features:O.D. Groove; Size (mm):60 x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter ; |
90 mm x 225 mm x 54 mm FAG NU418-M1 Cylindrical Roller Bearings Video
NU418-M1-C3 - FAG Cylindrical Roller - Quality Bearings
Product: NU418-M1-C3-FAG | Brand: FAG | Size: 90x225x54mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
FAG (Schaeffler) - NU418-M1 - Motion Industries
FAG (Schaeffler) NU418-M1. Cylindrical Roller Bearing - Straight, 90 mm ID, 225 mm OD, 54 mm Width, C0 Internal Clearance
NU418-M1 FAG • ABF Store
Product properties. Availability 3 pcs; Brand FAG; Item Number NU418-M1 FAG; Technical details (M1) M1=Solid Brass Cage, Two Piece, Roller Guided
FAG NU418M1-C3 Cylindrical Roller Bearing, Single Row
FAG NU418M1-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Standard Capacity, Brass Cage, C3 Clearance, 90mm ID,
NU418 -M1-C3 FAG • SP
Buy NU418 -M1-C3 manufactured by FAG. Inner Diameter: 90, Outer Diameter: 225, Width: 54, Weight: 11500. a.k.a. NU418/C3 (SKF)
FAG | NU418-M1-C3 | Single Row Cylindrical Roller Bearing
Shop FAG NU418-M1-C3 at Applied.com, which includes; FAG, Radial ID, 90 mm OD, 225 mm Width, Single Bearing, Rows of Bearings
FAG (Schaeffler) NU418-M1 - Cylindrical Roller ...
Buy FAG (Schaeffler) NU418-M1 - Cylindrical Roller Bearing - Straight Bore, 90 mm ID, 225 mm OD, 54 mm Width, C0 Internal Clearance: Cylindrical Roller