| No. | Brand | U | E | A | k | S | e | C | b |
| MA5218EX | NTN | - | - | - | - | - | - | - | - |
| NJ211-E-JP3-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ409W | NSK | - | - | - | - | - | - | - | - |
| NUP2305W | NSK | - | - | - | - | - | - | - | - |
| N322-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NUP220ET | NSK | - | - | - | - | - | - | - | - |
| NJ208-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NNU4956MC3 | NSK | - | - | - | - | - | - | - | - |
| NJ207-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ213-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NU324-E-M1-F1-C4 | FAG | - | - | - | - | - | - | 46.038 mm | - |
| NU320-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| N324-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NU320-E-M1A-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ205-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NNU4928MC3 | NSK | - | - | - | - | - | - | - | - |
| NUP2205W | NSK | - | - | - | - | - | - | - | - |
| NJ408WC3 | NSK | - | - | - | - | 45.0 mm | - | - | - |
| NJ211-E-M1-C3 | FAG | - | - | - | - | - | 0.083 in | - | - |
| NU418-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NU407-M1-C3 | FAG | - | - | - | - | - | - | 10 mm | - |
| NN3024MBKRE44CC1P4 | NSK | 13 mm | - | - | - | - | - | - | - |
| N328-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ319-E-TVP2-C4 | FAG | - | - | - | - | - | - | 27.5 mm | - |
| NU320-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NU409-M1 | FAG | - | - | - | - | - | - | - | - |
| NU421-M1-C4 | FAG | - | - | - | - | - | - | - | - |
| FAG NU320-E-M1A-C3 Cylindrical Roller Bearings | H:880 mm; db:460 mm; P180°:4200 kN; ATS:480 mm; Cap bolt, size:M 42x300; Initial grease fill, 40%:15 kg; ba max.:243 mm; N4 max.:40 mm; Cap bolt, rec. tightening torque:850 N·m; A1:440 mm; |
| 90 x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter NSK NJ318W Cylindrical Roller Bearings | Dimension X:1.4 in; Note:This product line wa; Cor - Static Load Rating:79358 lbf; Cr - Dynamic Load Rating:66768 lbf; Dimension B:8.0 in; Bearing Number:MSM90BR; Seal Type:Kevlar Packing Seal; Support Type:Take-Up; Shaft Size:90 mm; Bearing Type:Split Cylindrical Re; Size (mm):90 x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter ; |
| FAG NU322-E-M1A-C3 Cylindrical Roller Bearings | Grease Lubrication - M/N Seal:900 rpm; Full Timken Part Number:99999B; Dimension RV:0.47 in; Dimension BC:10.75 in; Shaft Tolerance:0.0030 in; Pre Install Clearance Min:0.0043 in; Dimension E:7.60 in; Dimension H:1.50 in; Bearing Number:22222; Dimension SV:4.13 in; |
| FAG NJ1007-M1-C3 Cylindrical Roller Bearings | R - Inner Ring To Clear Radius2:0.3 mm; r - Outer Ring To Clear Radius3:0.3 mm; Ce - Dynamic Radial Rating1:4980 N; do - Ball Diameter:4.762500 mm; Limiting Speed (Grease):69480 rpm; Bearing Weight:0.027 Kg; Bearing Width:9 mm; C0 - Static Radial Rating:1790 N; Limiting Speed (Oil):138960 rpm; Da - Outer Ring Backing Diameter:28.600 mm; |
| 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 1.181 Inch | 30 Millimeter NSK NN3015MBKRE44CC1P4 Cylindrical Roller Bearings | Cr - Dynamic Load Rating:14.5 kN; C0r - Static Load Rating:11.7 kN; Grease Limiting Speed:9000 rpm; Features:Contact Seals; Oil Limiting Speed:11000 rpm; Radius Rs min:0.600 mm; Outside Diameter D:72.000 mm; Outside Ring Width B:12.000 mm; Weight:0.123 Kg; Clearance:C3; Size (mm):2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 1.181 Inch | 30 Millimeter ; |
| FAG NU421-M1-C4 Cylindrical Roller Bearings | K - Factor7:1; Da - Cup Frontface Backing Diameter:50.00 mm; Series:32205-B; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)5:47000 N; Aa - Cage-Cone Backface Clearance:1.3 mm; a - Effective Center Location3:-3 mm; Db - Cup Backface Backing Diameter:42.93 mm; Bearing Weight:0.20 Kg; D:52.000 mm; |
| 50 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter NSK NUP2210ET Cylindrical Roller Bearings | Mass bushing:0.54 kg; Specific dynamic load factor K:140 N/mm²; D:110 mm; Tolerance housing:H7; Specific static load factor K0:200 N/mm²; B:120 mm; Tolerance shaft:h8; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; Effective load carrying cross section A:11210 mm²; Size (mm):50 x 3.543 Inch | 90 Millimeter x 0.906 Inch | 23 Millimeter ; |
| FAG NU410-M1-C3 Cylindrical Roller Bearings | Dimension D Max:11.25 in; Dimension L:4.02 in; Dimension D Min:9.38 in; Oil Lubrication - M/N Seal:1300 rpm; Eng Internal Radial Clearance - Max:0.0055; Grease Lubrication - T Seal:1800 rpm; Dimension H:1.88 in; Dimension B:7.69 in; Grease Lubrication - M/N Seal:1300 rpm; Dimension SVV:4.63 in; |
| FAG NJ214-E-M1-F1-T51F-C3 Cylindrical Roller Bearings | Q120°:4200 kN; Adapter sleeve:OH 3180 HE; H1:380 mm; Eye bolt, size:2 x M 42; ba min.:187 mm; H:755 mm; L:1120 mm; Bearing (basic designation):C 3180 K; da:380 mm; P150°:2700 kN; |
| 95 x 7.874 Inch | 200 Millimeter x 1.772 Inch | 45 Millimeter NSK NJ319W Cylindrical Roller Bearings | G2 - Heat Generation Factor (Rib-Roller End):37.9; d:80 mm; Cg - Geometry Factor:0.0838; DD:109.7 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:64100 N; Series:33116M; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:45700 N; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:25100 lbf; G1 - Heat Generation Factor (Roller-Raceway):121.6; Cone Part Number:XA33116M; Size (mm):95 x 7.874 Inch | 200 Millimeter x 1.772 Inch | 45 Millimeter ; |
| FAG NJ211-E-M1 Cylindrical Roller Bearings | e - ISO Factor2:0.34; Da - Cup Frontface Backing Diameter:3.62 in; C - Cup Width:0.9375 in; r - Cup Backface To Clear Radius1:0.130 in; Db - Cup Backface Backing Diameter:3.35 in; D:3.9362 in; Cg - Geometry Factor:0.0903; Design Units:Imperial; Cup Part Number:3731; Y - ISO Factor3:1.77; |
| FAG NJ206-E-M1-C3 Cylindrical Roller Bearings | Sleeve:S-3276 x 14; Locknut:N-076; B2:11.867 in; Tolerance1:-0.007 in; D1:17.755 in; Lockwasher and Lockplates:P-76; Series:223K and 232K; SNW/SNP Assembly Weight:136.69 lb; Taper:1:12; Bearing Number:23276K; |
| 120 mm x 260 mm x 55 mm FAG N324-E-M1 Cylindrical Roller Bearings | Static Load Rating Co:19520 kN; Backing Shaft Diameter ds:705.9 mm; Inner-Ring Set:650ARXS2841; Outer-Ring Set:723RXS2841; Lubrication Hole Diameter h:13.0 mm; Angle of Chamfer r1smin:20º; Backing Housing Diameter Ds:859.0 mm; DUR/DOR F/E:723.000 mm; Bore d:650.000 mm; Width B:670.000 mm; Size (mm):120 mm x 260 mm x 55 mm ; |
| FAG NJ213-E-TVP2-C3 Cylindrical Roller Bearings | e - Geometry Factor:0.22; Dimension G:2.780 in; Grease Lubrication - M/N Seal:1600 rpm; Bearing Number:22215; Weight:18.000 lb; Shaft Size :60 mm; Dimension C:3.7 in; C0 - Static Load:54100 lb; Dimension D:0.25 in; Pre Install Clearance Max:0.0037 in; |
60 mm x 150 mm x 35 mm FAG NU412-M1 Cylindrical Roller Bearings Video
FAG (Schaeffler) NU412-M1-F1-T51F ...
Buy FAG (Schaeffler) NU412-M1-F1-T51F - Cylindrical Roller Bearing - Straight Bore, 60 mm ID, 150 mm OD, 35 mm Width, C0 Internal Clearance: Cylindrical
NU412-M1 | Cylindrical Roller Bearings | Roller Bearings
NU412-XL-M1. BDI Part #. 1164879 ... FAG BEARING. Manufacturer ... Manufacturer URL. http://www.ina.com. Manufacturer Item Number. NU412. Weight / LBS
FAG | NU412-XL-M1-F1-T51F | Radial Cylindrical Roller
Shop FAG NU412-XL-M1-F1-T51F at Applied.com, which includes; Radial Bearing Type, 60 mm Inner Diameter, 150 mm Outer Diameter, 35 mm Width
Bearing NU412-M1 (FAG) | Size and Specification | Bearings
Cylindrical roller bearings NU412-M1 dimensions and specification
NU412M1 FAG • ABF Store
NU412M1 FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
FAG NU412M1-C3 Cylindrical Roller Bearing, Single Row
FAG NU412M1-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Standard Capacity, Brass Cage, C3 Clearance, 60mm ID,
FAG (Schaeffler) - NU412-M1-C4 - Motion Industries
Buy FAG (Schaeffler) Cylindrical Roller Bearings NU412-M1-C4 direct from Motion Industries. Your proven service leader with reliable delivery since 1972