| No. | Brand | U | E | A | k | S | e | C | b |
| NNU4956MC3 | NSK | - | - | - | - | - | - | - | - |
| NUP2310W | NSK | - | - | - | - | 0.697 in | - | - | - |
| NJ208-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| NJ1011-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ205-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ204-E-TVP2-C3 | FAG | - | - | - | - | - | - | 12 mm | - |
| NU322-E-M1A-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ319-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ206-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| N322-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| N326-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ326M | NSK | - | - | - | - | - | - | - | - |
| NJ319-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
| NJ209-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ307ET | NSK | - | - | - | - | - | - | - | - |
| NNU4938MC3 | NSK | - | - | - | - | - | - | - | 22.3 mm |
| NU411-M1-C3 | FAG | - | - | - | - | - | - | - | - |
| NU411-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ210-E-M1 | FAG | - | - | - | - | - | - | - | - |
| N408-M1 | FAG | - | - | - | - | - | - | - | - |
| NU409-M1A-C3 | FAG | - | - | - | - | - | - | - | - |
| MA5215EX | NTN | - | - | - | - | - | - | - | - |
| NJ314W | NSK | - | - | - | - | - | - | - | - |
| NN3022MBKRE44CC1P4 | NSK | - | - | - | - | - | - | - | - |
| NJ207-E-M1 | FAG | - | - | - | - | - | - | - | - |
| NJ318-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
| 45 x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter NSK NJ409W Cylindrical Roller Bearings | Dimension D Min:7.88 in; Dimension J (Bolt Size):0.625 in; Y1 - Geometry Factor:3.14; Oil Lubrication - M/N Seal:1600 rpm; Dimension L:3.40 in; Dimension B:6.43 in; e - Geometry Factor:0.22; Oil Lubrication - T Seal:2900 rpm; C0 - Static Load:54100 lb; Full Timken Part Number:QVPA15V207SB; Size (mm):45 x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter ; |
| FAG N322-E-M1-C3 Cylindrical Roller Bearings | Reference speed:7500 r/min; D:62 mm; Limiting speed:11000 r/min; d:30 mm; Calculation factor Y2:2.7; Da max.:56 mm; Ca min.:3 mm; Calculation factor e:0.37; Basic static load rating C0:116 kN; ra max.:1 mm; |
| FAG N321-E-M1-C3 Cylindrical Roller Bearings | J1:53.975 mm; da:80.963 mm; Max. speed for Taconite seal:950 r/min; Stabilizing ring:2 x SR-1518; PG:1/8 NPT; H2:41.275 mm; Initial grease fill:286.33 g; Adapter sleeve assembly:SNW 18x3.3/16; N1:19.05 mm; P90°:60.9 kN; |
| 65 x 5.512 Inch | 140 Millimeter x 1.299 Inch | 33 Millimeter NSK NJ313ET Cylindrical Roller Bearings | Eng Internal Radial Clearance - Min:0.0030; Pre Install Clearance Max:0.0047 in; Dimension L Exp:5.29 in; Y1 - Geometry Factor:2.84; UPC Code:0883450072229; Dimension H:1.50 in; Oil Lubrication - T Seal:2000 rpm; Weight:55 lb; Oil Lubrication - M/N Seal:1200 rpm; Dimension E:7.60 in; Size (mm):65 x 5.512 Inch | 140 Millimeter x 1.299 Inch | 33 Millimeter ; |
| FAG NU324-E-M1A-C3 Cylindrical Roller Bearings | J min.:431.8 mm; P60°:394 kN; P90°:236 kN; Appropriate attachment bolt size G:1 in; A1:158.75 mm; PG:1/4 NPT; Lock washer:W 30; Bearing limiting speed:3000 r/min; Cap bolt, SAE grade:8; H:317.5 mm; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter NSK NU2220WC3 Cylindrical Roller Bearings | Dimension D Max:11.25 in; Grease Lubrication - T Seal:2000 rpm; Eng Internal Radial Clearance - Max:0.0039; Dimension E:2.38 in; Shaft Size Type:Imperial; Dimension F:13.63 in; Eng Internal Radial Clearance - Min:0.0024; Dimension C:5.13 in; Float:0.083 in; C - Dynamic Load (Basic):79700 lb; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter ; |
| 60 mm x 150 mm x 35 mm FAG NU412-M1 Cylindrical Roller Bearings | Dimension N:10.875 in; Dimension L:6.5 in; Seal Type:High Temperature Pac; Bearing - Housing - Seal UPC:013992074669; Maximum Speed:2130 rpm; Dimension H:3.6 in; Support Type:Round Flange; Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal:MSM100BRHHTPS; Dimension T:15.0 in; Size (mm):60 mm x 150 mm x 35 mm ; |
| FAG NJ207-E-M1 Cylindrical Roller Bearings | B:10.5 mm; d1:115 mm; r1,2 min.:1.1 mm; d:65 mm; Mass shaft washer:0.56 kg; |
| FAG NU324-E-M1 Cylindrical Roller Bearings | Bearing UPC:013992032713; Note:This product line wa; Dimension P:1.0 in; Dimension R:16.2 in; Cr - Dynamic Load Rating:118025 lbf; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992098900; Shaft Size:4-15/16 in; Seal Type:Kevlar Packing Seal; Dimension V:0.1 in; |
| 11.024 Inch | 280 Millimeter x 16.535 Inch | 420 Millimeter x 4.173 Inch | 106 Millimeter NSK NNU3056M Cylindrical Roller Bearings | Cage Type:EJ; UPC Code:999999999; Locating Rings (width x OD):SR215X6.5; G:M24; L:410.00 mm; Max Oil Speed:2800; C0 Static Load Rating:913; Adapter Sleeve1:HA2320; Bolt Qty:2; Material :Cast Iron; Size (mm):11.024 Inch | 280 Millimeter x 16.535 Inch | 420 Millimeter x 4.173 Inch | 106 Millimeter ; |
| 1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.299 Inch | 33 Millimeter NSK NUP2308W Cylindrical Roller Bearings | Series:147000; G2 - Heat Generation Factor (Rib-Roller End):138; Cg - Geometry Factor8:0.195; Design Units:Imperial; e - ISO Factor4:0.83; C - Double Cup Width:4.7500 in; Y1 - ISO Factor5:0.81; Da - Cup Frontface Backing Diameter:18.43 in; G1 - Heat Generation Factor (Roller-Raceway)7:1490; Y2 - ISO Factor6:1.2; Size (mm):1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.299 Inch | 33 Millimeter ; |
| 120 mm x 260 mm x 55 mm FAG N324-E-M1 Cylindrical Roller Bearings | Static Load Rating Co:19520 kN; Backing Shaft Diameter ds:705.9 mm; Inner-Ring Set:650ARXS2841; Outer-Ring Set:723RXS2841; Lubrication Hole Diameter h:13.0 mm; Angle of Chamfer r1smin:20º; Backing Housing Diameter Ds:859.0 mm; DUR/DOR F/E:723.000 mm; Bore d:650.000 mm; Width B:670.000 mm; Size (mm):120 mm x 260 mm x 55 mm ; |
| 3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.339 Inch | 34 Millimeter NSK NN3016TBKRE44CC1P4 Cylindrical Roller Bearings | r - Cup Backface To Clear Radius2:2.29 mm; G2 - Heat Generation Factor (Rib-Roller End):11.8; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:3.3 mm; C0 - Static Radial Rating:16400 lbf; D:68.263 mm; Series:M38500; Aa - Cage-Cone Backface Clearance:-0.3 mm; d:34.925 mm; G1 - Heat Generation Factor (Roller-Raceway):20.3; Size (mm):3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.339 Inch | 34 Millimeter ; |
| FAG NJ205-E-TVP2-C3 Cylindrical Roller Bearings | rb max.:1 mm; Calculation factor kr:0.2; Db max.:114 mm; Mass bearing:0.81 kg; das:93.8 mm; Fatigue load limit Pu:20 kN; Basic static load rating C0:166 kN; Limiting speed:3200 r/min; D:120 mm; Basic dynamic load rating C:102 kN; |
95 mm x 200 mm x 45 mm FAG NJ319-E-TVP2 Cylindrical Roller Bearings Video
FAG NJ319-E-XL-TVP2 Cylindrical roller bearings - Nodes
FAG NJ319-E-XL-TVP2 bearing, cylindrical roller bearings, Dimensions: 95mm x 200mm x 45mm, Cr: 390000N, C0r: 380000N, Limiting Speeds:4050 1/min
FAG (Schaeffler) - NJ319-E-TVP2-C4 - Motion Industries
Buy FAG (Schaeffler) Cylindrical Roller Bearings NJ319-E-TVP2-C4 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
FAG NJ319-E-TVP2-C3 | Purvis Industries
FAG. Email Print. NJ319-E-TVP2-C3. CRB with cage > 120 mm = 200 mm. CP#:; Item#: NJ319-E-TVP2-C3; Mfr#: NJ319-E-TVP2-C3; UPC: 4012801385152
FAG NJ319-E-TVP2-C3 CYLINDRICAL ROLLER BEARING
FAG NJ319-E-TVP2-C3 CYLINDRICAL ROLLER BEARING: Amazon.com: Industrial & Scientific
Bearing NJ319-E-TVP2 (FAG) | Size and Specification
Cylindrical roller bearings NJ319-E-TVP2. Bearing number : NJ319-E-TVP2. Size (mm) : 95x200x45. Brand : FAG. Bore Diameter (mm) : 95. Outer Diameter
NJ319-E-TVP2 - FAG Cylindrical Roller - Quality Bearings
Product: NJ319-E-TVP2 | Brand: FAG | Size: 95x200x45mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
Bearing NJ319-E-TVP2 + HJ319-E (FAG) | Size and
Cylindrical roller bearings NJ319-E-TVP2 + HJ319-E dimensions and specification