No. | Brand | U | E | A | k | S | e | C | b |
NU407-C3 | FAG | - | - | - | - | - | - | - | - |
NJ326M | NSK | - | - | - | - | - | - | - | - |
NJ210-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
NUP2205ET | NSK | - | - | - | - | - | - | - | 45 mm |
NU413-M1-C3 | FAG | - | - | - | - | - | - | - | - |
NJ212-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
NNU4934MC3 | NSK | - | - | - | - | - | - | - | - |
NU418-M1 | FAG | - | - | - | - | - | - | - | - |
NJ319W | NSK | - | - | - | - | - | - | - | - |
NJ319-E-M1 | FAG | - | - | - | - | - | - | - | - |
MA5216EX | NTN | - | - | - | - | - | - | - | - |
NJ319-E-TVP2-C4 | FAG | - | - | - | - | - | - | 27.5 mm | - |
NJ317-E-TVP2-C4 | FAG | - | - | - | - | - | - | - | - |
NU326-E-TVP2 | FAG | - | - | - | - | - | - | - | - |
NN3022MBKRE44CC1P4 | NSK | - | - | - | - | - | - | - | - |
NJ1018-M1-C3 | FAG | - | - | - | - | - | - | - | - |
NU410-M1-C3 | FAG | - | - | - | - | - | - | - | - |
MA5218EX | NTN | - | - | - | - | - | - | - | - |
NJ208-E-TVP2-C3 | FAG | - | - | - | - | - | - | - | - |
NJ210-E-M1 | FAG | - | - | - | - | - | - | - | - |
NJ214-E-M1-C3 | FAG | - | - | - | - | - | - | - | - |
NJ211-E-M1 | FAG | - | - | - | - | - | - | - | - |
NU409-M1A-C4 | FAG | - | - | - | - | - | - | - | - |
5.118 Inch | 130 Millimeter x 11.024 Inch | 280 Millimeter x 2.283 Inch | 58 Millimeter NSK NJ326M Cylindrical Roller Bearings | B2:22 mm; Mass angle ring:0.59 kg; d:85 mm; d1 ≈:117 mm; B1:12 mm; r3,4 min.:3 mm; Size (mm):5.118 Inch | 130 Millimeter x 11.024 Inch | 280 Millimeter x 2.283 Inch | 58 Millimeter ; |
1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter NSK NUP2310W Cylindrical Roller Bearings | Series:223K and 232K; D1:4.411 in; B2:3.302 in; Diameter d :2 15/16 in; Bearing Number:22317K; S:0.697 in; Taper:1:12; Sleeve:S-117; Lockwasher and Lockplates:W-17; SNW/SNP Assembly Weight:3.2 lb; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter ; |
FAG NU324-E-M1 Cylindrical Roller Bearings | Bearing UPC:013992032713; Note:This product line wa; Dimension P:1.0 in; Dimension R:16.2 in; Cr - Dynamic Load Rating:118025 lbf; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992098900; Shaft Size:4-15/16 in; Seal Type:Kevlar Packing Seal; Dimension V:0.1 in; |
FAG NJ207-E-M1-C3 Cylindrical Roller Bearings | Db - Cup Backface Backing Diameter:64.01 mm; Cg - Geometry Factor:0.0668; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):13.3; C0 - Static Radial Rating:13900 lbf; Y - ISO Factor9:1.57; G1 - Heat Generation Factor (Roller-Raceway):18; Bearing Weight:0.5 Kg; C - Cup Width:15.875 mm; Da - Cup Frontface Backing Diameter:66.50 mm; |
2.953 Inch | 75 Millimeter x 6.299 Inch | 160 Millimeter x 1.457 Inch | 37 Millimeter NSK NJ315WC3 Cylindrical Roller Bearings | C1 - Dynamic Radial Rating (1 million revolutions)5:7130 lbf; G2 - Heat Generation Factor (Rib-Roller End):10.6; a - Effective Center Location3:-1.3 mm; r - Cup Backface To Clear Radius2:1.02 mm; D:58.738 mm; C - Cup Width:10.716 mm; B - Cone Width:15.080 mm; Cg - Geometry Factor:0.0601; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1500 lbf; db - Cone Backface Backing Diameter:37.59 mm; Size (mm):2.953 Inch | 75 Millimeter x 6.299 Inch | 160 Millimeter x 1.457 Inch | 37 Millimeter ; |
FAG NJ207-E-TVP2-C3 Cylindrical Roller Bearings | H2:38.1 mm; da:74.612 mm; Cap bolt, SAE grade:8; P150°:26.7 kN; ba:35.719 mm; Taconite seal:TER 53; J max.:279.4 mm; Appropriate attachment bolt size G:0.75 in; Stabilizing ring:SR-17-14; Adapter sleeve assembly:SNW 17x2.15/16; |
30 mm x 90 mm x 23 mm FAG NU406-M1 Cylindrical Roller Bearings | D4:61 mm; Lockwasher:MB 10; Thread D11:M50x1.5; Weight:0.15 Kg; T:2.5 mm; D3:70 mm; Bn:11 mm; s:6 mm; Size (mm):30 mm x 90 mm x 23 mm ; |
0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.709 Inch | 18 Millimeter NSK NUP2205W Cylindrical Roller Bearings | Cg - Geometry Factor8:0.218; K - Factor7:1.76; R - Cone Frontface To Clear Radius2:0.130 in; Cage Type:Pin-Type; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:250000 lbf; da - Cone Frontface Backing Diameter:16.18 in; Cone Part Number:HM266449DGW; Series:HM266400; C0 - Static Radial Rating:1060000 lbf; db - Cone Backface Backing Diameter:16.18 in; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.709 Inch | 18 Millimeter ; |
3.543 Inch | 90 Millimeter x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter NSK NJ318WC3 Cylindrical Roller Bearings | Oil Limiting Speed:45000 rpm; Bore Size d:6 mm; Weight:0.0070 Kg; Clearance:C3; Features:Shields; C0r - Static Load Rating:0.89 kN; Radius Rs min:0.300 mm; Outside Diameter D:19.0000 mm; Grease Limiting Speed:38000 rpm; Cr - Dynamic Load Rating:2.3 kN; Size (mm):3.543 Inch | 90 Millimeter x 7.48 Inch | 190 Millimeter x 1.693 Inch | 43 Millimeter ; |
FAG NU324-E-M1A-C3 Cylindrical Roller Bearings | J min.:431.8 mm; P60°:394 kN; P90°:236 kN; Appropriate attachment bolt size G:1 in; A1:158.75 mm; PG:1/4 NPT; Lock washer:W 30; Bearing limiting speed:3000 r/min; Cap bolt, SAE grade:8; H:317.5 mm; |
45 x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter NSK NJ409W Cylindrical Roller Bearings | Dimension D Min:7.88 in; Dimension J (Bolt Size):0.625 in; Y1 - Geometry Factor:3.14; Oil Lubrication - M/N Seal:1600 rpm; Dimension L:3.40 in; Dimension B:6.43 in; e - Geometry Factor:0.22; Oil Lubrication - T Seal:2900 rpm; C0 - Static Load:54100 lb; Full Timken Part Number:QVPA15V207SB; Size (mm):45 x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter ; |
80 mm x 200 mm x 48 mm FAG NU416-M1 Cylindrical Roller Bearings | Aa - Cage-Cone Backface Clearance:0.08 in; B - Cone Width:1.0938 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:8350 lbf; R - Cone Backface To Clear Radius3:0.06 in; C0 - Static Radial Rating:91800 lbf; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):226; C1 - Dynamic Radial Rating (1 million revolutions)6:47400 lbf; da - Cone Frontface Backing Diameter:8.07 in; C90 - Dynamic Radial Rating (90 million revolutions)5:12300 lbf; |
FAG NU322-E-M1 Cylindrical Roller Bearings | Cg - Geometry Factor12:0.063; G2 - Heat Generation Factor (Rib-Roller End):10.1; db - Cone Backface Backing Diameter:1.75 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2500 lbf; Y2 - ISO Factor10:2.79; B - Cone Width:0.7450 in; r - Cup Frontface To Clear Radius2:0.02 in; Y1 - ISO Factor9:1.87; Cup Part Number:26282D; Series:26000; |
3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.339 Inch | 34 Millimeter NSK NN3016TBKRE44CC1P4 Cylindrical Roller Bearings | r - Cup Backface To Clear Radius2:2.29 mm; G2 - Heat Generation Factor (Rib-Roller End):11.8; Cage Type:Stamped Steel; Ab - Cage-Cone Frontface Clearance:3.3 mm; C0 - Static Radial Rating:16400 lbf; D:68.263 mm; Series:M38500; Aa - Cage-Cone Backface Clearance:-0.3 mm; d:34.925 mm; G1 - Heat Generation Factor (Roller-Raceway):20.3; Size (mm):3.15 Inch | 80 Millimeter x 4.921 Inch | 125 Millimeter x 1.339 Inch | 34 Millimeter ; |
35 mm x 72 mm x 17 mm FAG NJ207-E-TVP2 Cylindrical Roller Bearings Video
FAG (Schaeffler) - NJ207-E-TVP2-C3 - Motion Industries
Buy FAG (Schaeffler) Cylindrical Roller Bearings NJ207-E-TVP2-C3 direct from Motion Industries. Your proven service leader with reliable delivery since 1972
NJ207-E-TVP2 - FAG Cylindrical Roller - Quality Bearings
This NJ207-E-TVP2 bearing is a single row cylindrical roller bearing, it has 1 flange on the inner ring, an increased capacity design, a glass fibre reinforced
NJ207-E-TVP2 FAG • ABF Store
NJ207-E-TVP2 FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
FAG NJ207-E-TVP2-C3 CYLINDRICAL ROLLER BEARING
Part Number, NJ207-E-TVP2-C3. UPC, 743270440182. Brand Name, FAG. EAN, 0743270440182. Item Weight, 10.9 ounces. Model Number, NJ207-E-TVP2-
FAG NJ207E-TVP2 Cylindrical Roller Bearing, Single Row
FAG NJ207E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flanged, High Capacity, ... Part Number, NJ207-E-TVP2
Cylindrical roller bearings - NJ207-E-XL-TVP2 - medias
NJ207-E-XL-TVP2. Cylindrical roller bearings main dimensions to DIN 5412-1, semi-locating bearing, separable, with cage
FAG | NJ207-E-XL-TVP2 | Radial Cylindrical Roller Bearing
Shop FAG NJ207-E-XL-TVP2 at Applied.com, which includes; Radial Bearing Type, 35 mm Inner Diameter, 72 mm Outer Diameter, 17 mm Width