| 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter CONSOLIDATED BEARING 5213-ZZNR Angular Contact Ball Bearings | J:130 mm; Z:30 mm; T min.:-20 °C; L:90 mm; B:25.4 mm; s1:30.2 mm; A1:16 mm; A2:48.4 mm; J1:66 mm; S:9.5 mm; Size (mm):2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter ; |
| 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.063 Inch | 52.4 Millimeter CONSOLIDATED BEARING 5218 Angular Contact Ball Bearings | Eng Internal Radial Clearance - Min:0.0053; Dimension SVV:5.13 in; Pre Install Clearance Min:0.0053 in; Dimension A:4.25 in; Dimension D Min:10.04 in; Grease Lubrication - M/N Seal:900 rpm; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Dimension L:4.59 in; Oil Lubrication - B/C/O Seal:600 rpm; Size (mm):3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.063 Inch | 52.4 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-ZZNR Angular Contact Ball Bearings | Weight:6.44 kg; C0:49.5 kN; s1:61.2 mm; d:75 mm; A1:22 mm; Recommended tightening torque for set screw:22 Nm; Designation of bearing:EX215G2L3; C:66 kN; T min.:-20 °C; L:200 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter CONSOLIDATED BEARING 5215-ZZ Angular Contact Ball Bearings | Bearing Number:LSE403BR; Dimension P:0.9 in; Series Type:Light Series; Note:This product line wa; Dimension V:6.4 in; Cr - Dynamic Load Rating:71040 lbf; Maximum Speed:1970 rpm; Bearing UPC:013992026682; Dimension N:15.0 in; Dimension S:2.8 in; Size (mm):2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter ; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter CONSOLIDATED BEARING 5220 M Angular Contact Ball Bearings | Y1:2.18; rs min:2 mm; Min operating temperature, Tmin:-40 °C; Y0:2.13; da min:138.8 mm; Characteristic inner ring frequency, BPFI:12.84 Hz; Dynamic load, C:684 kN; d2:143 mm; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.44 Hz; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter ; |
| 6 Inch | 152.4 Millimeter x 8 Inch | 203.2 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-60 XPO Angular Contact Ball Bearings | f0:13.2; Snap Ring:Yes; Category:Single Row Ball Bear; Inventory:0.0; Characteristic cage frequency, FTF:0.38 Hz; d:20 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; Characteristic rolling element frequency, BSF:4.12 Hz; rs min:1 mm; Static load, C0:6.65 kN; Size (mm):6 Inch | 152.4 Millimeter x 8 Inch | 203.2 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 1.75 Inch | 44.45 Millimeter x 4.25 Inch | 107.95 Millimeter x 1.063 Inch | 27 Millimeter RHP BEARING MJT1.3/4M Angular Contact Ball Bearings | T min.:-40 °C; Designation of bearing:ES205-16G2T04; G:R1/8"; Weight:0.58 kg; J:50.8 mm; B1:30.9 mm; H1:10 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; s1:24.2 mm; Size (mm):1.75 Inch | 44.45 Millimeter x 4.25 Inch | 107.95 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 7.5 Inch | 190.5 Millimeter x 9.5 Inch | 241.3 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-75 XPO Angular Contact Ball Bearings | Dimension N:3.57 in; Engineering Group:Mounted Bearing; e - Geometry Factor:0.24; Full Timken Part Number:QMTU13J060SB; Dimension J:3.75 in; Pre Install Clearance Min:0.040 mm; Dimension L:7.63 in; Dimension M:2.13 in; Eng Internal Radial Clearance - Min:0.0016; Shaft Size :60 mm; Size (mm):7.5 Inch | 190.5 Millimeter x 9.5 Inch | 241.3 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 5305 C/4 Angular Contact Ball Bearings | Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H :7-1/16 in; Dimension H2:15.35 in; Bearing Type:Split Cylindrical Ex; Series Type:Light Series; Dimension L :24-3/4 in; Dimension J1 :21-5/8 in; Dimension K :4-1/4 in; Maximum Speed:1450 rpm; Dimension M :6-3/4 in; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter CONSOLIDATED BEARING 5303 B Angular Contact Ball Bearings | L1:22.5 mm; d1:51.1 mm; S:18.8 mm; Weight:1.46 kg; s1:36.3 mm; d:35 mm; C:25.7 kN; A:45 mm; H2:93 mm; B1:51.1 mm; Size (mm):0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter CONSOLIDATED BEARING 5213-2RSNR Angular Contact Ball Bearings | Snap Ring:No; closure type:Open; bearing material:Hardened Alloy Steel; Noun:Bearing; F:167 mm; B:58 mm; da min:146 mm; UNSPSC:31171547; finish/coating:Uncoated; Size (mm):2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter ; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter CONSOLIDATED BEARING 5220 C/3 Angular Contact Ball Bearings | J1:92 mm; J:202 mm; A:48 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:100 °C; C0:32.8 kN; H:250 mm; e:29 mm; L1:118 mm; B:65.1 mm; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter ; |
| 2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter CONSOLIDATED BEARING 5215 C/3 Angular Contact Ball Bearings | J:89.5 mm; e:11 mm; S:7 mm; C:12.8 kN; Designation of bearing:US204G2T04; H1:35 mm; B:25 mm; s1:12.5 mm; N:11,5mm; A2:29 mm; Size (mm):2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-2RSNR C/3 Angular Contact Ball Bearings | Max Oil Speed:5100; Housing Mass:6.90 Kg; Max Grease Speed:4200; Seal Type:Double Lip; J:230 mm; N:15 mm; Seal:TSNG312; Locating Rings (width x OD):SR130X12.5; Housing:FSNT 515-612; End Cover1:EC515-612; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |