| 3.346 Inch | 85 Millimeter x 5.906 Inch | 150 Millimeter x 1.937 Inch | 49.2 Millimeter CONSOLIDATED BEARING 5217 M Angular Contact Ball Bearings | Designation of housing:PAE203N-; s1:11 mm; Weight:0.4 kg; C0:4.78 kN; C:9.55 kN; H1:9 mm; N:M8; B:22 mm; S:6 mm; A1:18 mm; Size (mm):3.346 Inch | 85 Millimeter x 5.906 Inch | 150 Millimeter x 1.937 Inch | 49.2 Millimeter ; |
| 1.772 Inch | 45 Millimeter x 2.283 Inch | 58 Millimeter x 0.394 Inch | 10 Millimeter CONSOLIDATED BEARING 3809-2RS Angular Contact Ball Bearings | L:205.00 mm; Max Grease Speed:5000; Cage Type:EJ; J:170.00 mm; Locating Rings (width x OD):SR90X9; Lockwasher:MB10; N1:20.00 mm; H:113.00 mm; Adapter Sleeve1:HE310; Locknut:KM10; Size (mm):1.772 Inch | 45 Millimeter x 2.283 Inch | 58 Millimeter x 0.394 Inch | 10 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-ZZ C/3 Angular Contact Ball Bearings | C0:11.2 kN; A4:23 mm; T min.:-20 °C; G:M6x1; T max.:200 °C; H3:80; Designation of housing:FC206N-; Recommended tightening torque for set screw:3.7 Nm; Designation of closed end cover:SCC206; A1:8 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 1.625 Inch | 41.275 Millimeter x 4 Inch | 101.6 Millimeter x 0.938 Inch | 23.825 Millimeter RHP BEARING MJT1.5/8M Angular Contact Ball Bearings | db - Cone Backface Backing Diameter:2.87 in; da - Cone Frontface Backing Diameter:2.72 in; C90 - Dynamic Radial Rating (90 million revolutions)4:8360 lbf; Cg - Geometry Factor11:0.108; C1 - Dynamic Radial Rating (1 million revolutions)5:32200 lbf; D1 - Flange Outer Diameter:4.9384 in; D:4.7244 in; C0 - Static Radial Rating:41900 lbf; Cage Type:Stamped Steel; a - Effective Center Location3:-0.16 in; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter CONSOLIDATED BEARING 5220 M Angular Contact Ball Bearings | Y1:2.18; rs min:2 mm; Min operating temperature, Tmin:-40 °C; Y0:2.13; da min:138.8 mm; Characteristic inner ring frequency, BPFI:12.84 Hz; Dynamic load, C:684 kN; d2:143 mm; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.44 Hz; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter ; |
| 4.134 Inch | 105 Millimeter x 7.48 Inch | 190 Millimeter x 2.563 Inch | 65.1 Millimeter CONSOLIDATED BEARING 5221 M Angular Contact Ball Bearings | A1:13 mm; T max.:100 °C; H:180 mm; S:10.2 mm; Designation of bearing:US209-28G2; d:44.45 mm; J:148.5 mm; L:111 mm; C:31.85 kN; B:41.2 mm; Size (mm):4.134 Inch | 105 Millimeter x 7.48 Inch | 190 Millimeter x 2.563 Inch | 65.1 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 3305-DA Angular Contact Ball Bearings | Recommended tightening torque for set screw:16.8 Nm; s1:32.55 mm; Z:51 mm; A1:18 mm; C0:40 kN; N:18mm; J:150 mm; Weight:6.34 kg; C:57.2 kN; L:188 mm; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter CONSOLIDATED BEARING 5220 M C/3 Angular Contact Ball Bearings | G:R1/8"; C:12.8 kN; T max.:200 °C; B:31 mm; H1:14.5 mm; L1:40 mm; C0:6.65 kN; J:97 mm; Z:15.3 mm; Weight:0.6 kg; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 2.374 Inch | 60.3 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 2.559 Inch | 65 Millimeter x 0.472 Inch | 12 Millimeter CONSOLIDATED BEARING 3810-2RS Angular Contact Ball Bearings | L:97.00 mm; C:24 mm; Thread G:M140x2; Lockwasher and Lockplates:MB28; Appropriate Hydraulic Nut:HMV28; Locknut:KM28; D3:180 mm; Weight:4.34 Kg; d1:125.00 mm; Size (mm):1.969 Inch | 50 Millimeter x 2.559 Inch | 65 Millimeter x 0.472 Inch | 12 Millimeter ; |
| 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter CONSOLIDATED BEARING 5213-ZZNR Angular Contact Ball Bearings | J:130 mm; Z:30 mm; T min.:-20 °C; L:90 mm; B:25.4 mm; s1:30.2 mm; A1:16 mm; A2:48.4 mm; J1:66 mm; S:9.5 mm; Size (mm):2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter ; |
| 3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 2.189 Inch | 55.6 Millimeter CONSOLIDATED BEARING 5219 M C/2 Angular Contact Ball Bearings | SW:3 mm; C0:7.88 kN; Recommended tightening torque for set screw:5.5 Nm; S:7.5 mm; s1:13.5 mm; A3:1.5 mm; H:80 mm; A:22 mm; B:27 mm; C:14 kN; Size (mm):3.74 Inch | 95 Millimeter x 6.693 Inch | 170 Millimeter x 2.189 Inch | 55.6 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-ZZNR C/2 Angular Contact Ball Bearings | T min.:-20 °C; C:35.1 kN; Recommended tightening torque for set screw:8 Nm; d:49.21 mm; B1:62.7 mm; A1:35 mm; S:24.6 mm; Weight:3.04 kg; H1:21 mm; A:60 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-2RS Angular Contact Ball Bearings | Characteristic inner ring frequency, BPFI:5.41 Hz; Dynamic load, C:9.4 kN; D:42 mm; Min operating temperature, Tmin:-25 °C; ra max:0.6 mm; Max operating temperature, Tmax:110 °C; da max:26 mm; B:12 mm; Nlim (grease):18,000 rpm; Characteristic cage frequency, FTF:0.4 Hz; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 3.937 Inch | 100 Millimeter x 4.921 Inch | 125 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 3820-2RS Angular Contact Ball Bearings | B - Cone Width:0.7810 in; Cg - Geometry Factor:0.0758; db - Cone Backface Backing Diameter:2.05 in; G2 - Heat Generation Factor (Rib-Roller End):14.4; G1 - Heat Generation Factor (Roller-Raceway):23.7; d:1.6875 in; K - Factor8:1.36; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.1 in; Cage Type:Stamped Steel; Size (mm):3.937 Inch | 100 Millimeter x 4.921 Inch | 125 Millimeter x 0.748 Inch | 19 Millimeter ; |