| 7.5 Inch | 190.5 Millimeter x 9.5 Inch | 241.3 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-75 ARO Angular Contact Ball Bearings | Nlim:3,400 rpm; Nref:2,800 rpm; r1a max:2.5 mm; Brand:SNR; Radial clearance class:CN; Characteristic cage frequency, FTF:0.4 Hz; da min:123 mm; d:110 mm; Min operating temperature, Tmin:-20 °C; dc min:158 mm; Size (mm):7.5 Inch | 190.5 Millimeter x 9.5 Inch | 241.3 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 8 Inch | 203.2 Millimeter x 10 Inch | 254 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-80 ARO Angular Contact Ball Bearings | B:61.9 mm; A5:30.9 mm; Designation of housing:T312-; Designation of bearing:EX312-36G2T20; N1:31 mm; N2:71 mm; d1:89 mm; A2:46 mm; N:41mm; C:81.6 kN; Size (mm):8 Inch | 203.2 Millimeter x 10 Inch | 254 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 1.772 Inch | 45 Millimeter x 2.283 Inch | 58 Millimeter x 0.394 Inch | 10 Millimeter CONSOLIDATED BEARING 3809-2RS Angular Contact Ball Bearings | L:205.00 mm; Max Grease Speed:5000; Cage Type:EJ; J:170.00 mm; Locating Rings (width x OD):SR90X9; Lockwasher:MB10; N1:20.00 mm; H:113.00 mm; Adapter Sleeve1:HE310; Locknut:KM10; Size (mm):1.772 Inch | 45 Millimeter x 2.283 Inch | 58 Millimeter x 0.394 Inch | 10 Millimeter ; |
| 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter CONSOLIDATED BEARING 5213-2RSNR Angular Contact Ball Bearings | Snap Ring:No; closure type:Open; bearing material:Hardened Alloy Steel; Noun:Bearing; F:167 mm; B:58 mm; da min:146 mm; UNSPSC:31171547; finish/coating:Uncoated; Size (mm):2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 5305 B NR Angular Contact Ball Bearings | Dimension J1 :21-5/8 in; Note:This product line wa; Dimension J2 :19-3/8 in; Maximum Speed:1450 rpm; Series Type:Light Series; Seal Type:Felt Type; Dimension M :6-3/4 in; Housing Width:6.8 in; Dimension H :7-1/16 in; Shaft Size:5-11/16 in; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter CONSOLIDATED BEARING 5303 B Angular Contact Ball Bearings | L1:22.5 mm; d1:51.1 mm; S:18.8 mm; Weight:1.46 kg; s1:36.3 mm; d:35 mm; C:25.7 kN; A:45 mm; H2:93 mm; B1:51.1 mm; Size (mm):0.669 Inch | 17 Millimeter x 1.85 Inch | 47 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| 0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter CONSOLIDATED BEARING 5304 B C/3 Angular Contact Ball Bearings | Characteristic cage frequency, FTF:0.45 Hz; Characteristic outer ring frequency, BPF0:7.66 Hz; da min:106.5 mm; Radial clearance class:CN; D:140 mm; Nlim (grease):4,500 rpm; ra max:1 mm; Da max:133.5 mm; Min operating temperature, Tmin:-20 °C; Dynamic load, C:41 kN; Size (mm):0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| 0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter CONSOLIDATED BEARING 5304 C/4 Angular Contact Ball Bearings | Rating life coefficient, A2:1.4; B:29.9 mm; Characteristic inner ring frequency, BPFI:9.36 Hz; Fatigue limit load, Cu:15.7 kN; Max operating temperature, Tmax:120 °C; Nlim (grease):4,200 rpm; d:44.45 mm; Dynamic load, C:108 kN; Characteristic outer ring frequency, BPF0:6.64 Hz; Nlim (oil):5,600 rpm; Size (mm):0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| 0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5302-2RSNR C/3 Angular Contact Ball Bearings | A5:19.5 mm; Designation of open end cover:SCO205-25; L3:51 mm; Designation of closed end cover:SCC205; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; A:32 mm; L:97 mm; C0:7.88 kN; B:27 mm; Size (mm):0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 3312-DA M Angular Contact Ball Bearings | H:69.9 mm; G:R1/8"; N1:28 mm; Designation of housing:PE212-; L:240 mm; S:14.9 mm; H1:25 mm; J:190 mm; A1:42 mm; H2:140 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter CONSOLIDATED BEARING 5304-ZZ Angular Contact Ball Bearings | d:38.1 mm; C:29.6 kN; H:100 mm; Designation of housing:PH208N-; Designation of bearing:UC208-24G2T04; N1:25 mm; H2:149 mm; Weight:2.85 kg; G:M6x1; L1:58 mm; Size (mm):0.787 Inch | 20 Millimeter x 2.047 Inch | 52 Millimeter x 0.874 Inch | 22.2 Millimeter ; |
| 6.5 Inch | 165.1 Millimeter x 8.5 Inch | 215.9 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-65 XPO Angular Contact Ball Bearings | A:32 mm; Designation of closed end cover:SCC204; A1:12 mm; N1:16 mm; A5:18.3 mm; Weight:0.83 kg; B:31 mm; Recommended tightening torque for set screw:3.7 Nm; L1:61 mm; Dz:54 mm; Size (mm):6.5 Inch | 165.1 Millimeter x 8.5 Inch | 215.9 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5302-ZZ C/3 Angular Contact Ball Bearings | Bearing Number:MSE307BR; Bearing Type:Split Cylindrical Re; Pillow/Plummer Block Style:Split Cylindrical Ho; Housing Width:6.0 in; Series Type:Medium Series; Seal Type:Felt Type; Bearing - Housing - Seal:MSE307BRH; Bearing UPC:013992032171; Dimension H1:2.0 in; Maximum Speed:2520 rpm; Size (mm):0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 5305 C/4 Angular Contact Ball Bearings | Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H :7-1/16 in; Dimension H2:15.35 in; Bearing Type:Split Cylindrical Ex; Series Type:Light Series; Dimension L :24-3/4 in; Dimension J1 :21-5/8 in; Dimension K :4-1/4 in; Maximum Speed:1450 rpm; Dimension M :6-3/4 in; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |