| No. | Brand | A | e | F | k | h | a | E | t |
| 5220 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| MJT5/8M | RHP BEARING | - | - | - | - | - | - | - | - |
| 5312-2RSNR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5312 B C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5219 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5304 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 3309-DA M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| KU-55 XPO-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| KU-40 XPO-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| KG-70 ARO | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 3801-2RS | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5312-2RS C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5214-ZZNR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5303-2RSNR | CONSOLIDATED BEARING | 54 mm | - | - | - | - | - | - | - |
| 5221 M | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5214-ZZ | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5303-ZZNR C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| KG-75 ARO | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 5215-ZZNR | CONSOLIDATED BEARING | - | 22 mm | - | - | - | - | - | - |
| 5305 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5302-2RS C/3 Angular Contact Ball Bearings | e - Geometry Factor:0.25; Weight:87 lb; Eng Internal Radial Clearance - Min:0.0053; Dimension F:18.500 in; Dimension RV:0.19 in; Y2 - Geometry Factor:4.06; C0 - Static Load:147000 lb; Dimension C:5.5 in; Grease Lubrication - T Seal:1200 rpm; Pre Install Clearance Max:0.0067 in; Size (mm):0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.063 Inch | 52.4 Millimeter CONSOLIDATED BEARING 5218 Angular Contact Ball Bearings | Eng Internal Radial Clearance - Min:0.0053; Dimension SVV:5.13 in; Pre Install Clearance Min:0.0053 in; Dimension A:4.25 in; Dimension D Min:10.04 in; Grease Lubrication - M/N Seal:900 rpm; C - Dynamic Load (Basic):125000 lb; Dimension H:2.12 in; Dimension L:4.59 in; Oil Lubrication - B/C/O Seal:600 rpm; Size (mm):3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.063 Inch | 52.4 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312-ZZNR C/2 Angular Contact Ball Bearings | T min.:-20 °C; C:35.1 kN; Recommended tightening torque for set screw:8 Nm; d:49.21 mm; B1:62.7 mm; A1:35 mm; S:24.6 mm; Weight:3.04 kg; H1:21 mm; A:60 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 8 Inch | 203.2 Millimeter x 10 Inch | 254 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-80 ARO Angular Contact Ball Bearings | B:61.9 mm; A5:30.9 mm; Designation of housing:T312-; Designation of bearing:EX312-36G2T20; N1:31 mm; N2:71 mm; d1:89 mm; A2:46 mm; N:41mm; C:81.6 kN; Size (mm):8 Inch | 203.2 Millimeter x 10 Inch | 254 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter CONSOLIDATED BEARING 5215 Angular Contact Ball Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9060 lbf; Cage Type:Stamped Steel; Y1 - ISO Factor9:2.1; Cone Part Number:48393D; T - Bearing Width across Cups:3.0624 in; K - Factor7:1.82; Cg - Geometry Factor11:0.121; Design Units:Imperial; Y2 - ISO Factor10:3.13; e - ISO Factor8:0.32; Size (mm):2.953 Inch | 75 Millimeter x 5.118 Inch | 130 Millimeter x 1.626 Inch | 41.3 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter CONSOLIDATED BEARING 5312 NR C/3 Angular Contact Ball Bearings | Designation of open end cover:SCOE211-55; H2:125 mm; Designation of bearing:EX211G2; H:63.5 mm; Recommended tightening torque for set screw:22 Nm; C:43.55 kN; B1:71.3 mm; L1:47 mm; T max.:100 °C; A1:33 mm; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter ; |
| 2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter CONSOLIDATED BEARING 5213-ZZNR Angular Contact Ball Bearings | J:130 mm; Z:30 mm; T min.:-20 °C; L:90 mm; B:25.4 mm; s1:30.2 mm; A1:16 mm; A2:48.4 mm; J1:66 mm; S:9.5 mm; Size (mm):2.559 Inch | 65 Millimeter x 4.724 Inch | 120 Millimeter x 1.5 Inch | 38.1 Millimeter ; |
| 0.472 Inch | 12 Millimeter x 1.457 Inch | 37 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5301-ZZ C/2 Angular Contact Ball Bearings | outside diameter:0.5118 in; inside diameter:0.3937 in; t:1 mm; d:10 mm; Mass:0.0052 kg; da min:12 mm; bore type:Round; Brand:NTN; rs min:0.3 mm; material:High Carbon Chrome S; Size (mm):0.472 Inch | 12 Millimeter x 1.457 Inch | 37 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 5305 B NR Angular Contact Ball Bearings | Dimension J1 :21-5/8 in; Note:This product line wa; Dimension J2 :19-3/8 in; Maximum Speed:1450 rpm; Series Type:Light Series; Seal Type:Felt Type; Dimension M :6-3/4 in; Housing Width:6.8 in; Dimension H :7-1/16 in; Shaft Size:5-11/16 in; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 7 Inch | 177.8 Millimeter x 9 Inch | 228.6 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING KG-70 XPO Angular Contact Ball Bearings | C0:23.2 kN; J:159 mm; H1:22 mm; B:30.2 mm; T max.:200 °C; C:35.1 kN; d1:67.2 mm; B1:43.7 mm; s1:33.4 mm; N:20mm; Size (mm):7 Inch | 177.8 Millimeter x 9 Inch | 228.6 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 5305 C/4 Angular Contact Ball Bearings | Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension H :7-1/16 in; Dimension H2:15.35 in; Bearing Type:Split Cylindrical Ex; Series Type:Light Series; Dimension L :24-3/4 in; Dimension J1 :21-5/8 in; Dimension K :4-1/4 in; Maximum Speed:1450 rpm; Dimension M :6-3/4 in; Size (mm):0.984 Inch | 25 Millimeter x 2.441 Inch | 62 Millimeter x 1 Inch | 25.4 Millimeter ; |
| 0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 5302 C/2 Angular Contact Ball Bearings | Weight:3.86 kg; T min.:-20 °C; A4:30 mm; e:13 mm; L:185 mm; Z:62.8 mm; Designation of open end cover:SCOU211-35; A:42 mm; Dz:110 mm; C:43.55 kN; Size (mm):0.591 Inch | 15 Millimeter x 1.654 Inch | 42 Millimeter x 0.748 Inch | 19 Millimeter ; |
| 4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.748 Inch | 69.8 Millimeter CONSOLIDATED BEARING 5222 C/3 Angular Contact Ball Bearings | B:22 mm; Z:34.5 mm; Recommended tightening torque for set screw:3.2 Nm; N:12mm; A4:20.5 mm; d:17.46 mm; Dz:46 mm; s1:11 mm; T max.:200 °C; Designation of open end cover:SCOU203-11; Size (mm):4.331 Inch | 110 Millimeter x 7.874 Inch | 200 Millimeter x 2.748 Inch | 69.8 Millimeter ; |
| 1.5 Inch | 38.1 Millimeter x 3.75 Inch | 95.25 Millimeter x 0.938 Inch | 23.825 Millimeter RHP BEARING MJT1.1/2M Angular Contact Ball Bearings | T max.:100 °C; C:35.1 kN; L3:86 mm; G:M6x1; N1:19 mm; B:49.2 mm; A2:37 mm; A1:16 mm; P:300 mm; T min.:-20 °C; Size (mm):1.5 Inch | 38.1 Millimeter x 3.75 Inch | 95.25 Millimeter x 0.938 Inch | 23.825 Millimeter ; |
5 Inch | 127 Millimeter x 5.75 Inch | 146.05 Millimeter x 0.5 Inch | 12.7 Millimeter CONSOLIDATED BEARING KU-50 XPO-2RS Angular Contact Ball Bearings Video