Z-512580.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
Various Roll Neck Bearings For Rolling Mill types NTN-SNR BEARING LIMITED and sizes 325,000 N Static Load Rating to accommodate your Z-512580.ZL FAG ROLL NECK BEARINGS for ROLLING MILL requirements. Pressed Steel Retainer Material
| Brand Name: | FAG |
| Model Number: | Z-512580.ZL |
| Retainer Material: | Pressed Steel |
| Groove Width A: | 7 mm |
| Static Load Rating: | 325,000 N |
| ra (max): | 1.5 mm |
| Axial Load Factor Y1: | 3.01 |
| Bore Type: | Tapered Bore |
| Da (max): | 141 mm |
| Configuration: | Double Row |
Product Details
| Retainer Material | Pressed Steel |
| Groove Width A | 7 mm |
| Static Load Rating | 325,000 N |
| ra (max) | 1.5 mm |
| Axial Load Factor Y1 | 3.01 |
| Bore Type | Tapered Bore |
| Da (max) | 141 mm |
| Configuration | Double Row |
| da (min) | 117 mm |
| Limiting Speed - Grease | 3,000 rpm |
| d | 100 mm |
| Center Guidance | Floating Steel Ring |
| Enclosure | Open |
| D | 150 mm |
| Dynamic Load Rating | 286,000 N |
| Roller Profile | Symmetric |
| Radial Clearance | 0.110 to 0.140 mm |
| Nr. of Holes | 4 |
| Hole Diameter (do) | 4 mm |
| B | 37 mm |
Recommended Products
Top Products
5.906 Inch | 150 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.688 Inch | 169.875 Millimeter QM IN
DODGE F4B-DL-110L Flange Block Bearings
3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.063 Inch | 52.4 Millimeter NTN MA5218EX
QM INDUSTRIES QAMC15A215SN Cartridge Unit Bearings
NTN 6205v12 Bearing